Φ60 mm Photoresist Capsule Filter, 0.10-10 µm (CAT#: STEM-BC-2829-ZJF)

This capsule filter is a compact disposable filtration unit for low-flow liquid and gas applications. Its small internal volume and filtration area make it suitable for valuable fluids and processes that require minimal product hold-up. The unit can be configured with polypropylene, polyethersulfone, polyvinylidene fluoride, polytetrafluoroethylene, nylon, cellulose-based, or glass-fiber media. Polypropylene is used for the flow-distribution layers, outer support shell, and internal support structure. Different lengths, retention ratings, and connection styles support laboratory, chemical, pharmaceutical, electronics, and fermentation applications. The capsule can be used for pretreatment or final filtration depending on the selected membrane. It is suitable for photoresist, developer, inks, dyes, solvents, aqueous samples, culture media, corrosive liquids, and process gases. Each cartridge is subjected to integrity testing before use. The one-piece disposable construction simplifies installation and replacement without requiring a separate reusable housing.

Diameter: Φ60 mm
Available lengths: 2.5 in, 5 in, and 10 in, with custom sizes available
Membrane options: PP, PES, PVDF, PTFE, N6, N66, CN-CA, and GF
Flow-distribution layer: Polypropylene fiber
Outer shell: Polypropylene
Inner support: Polypropylene
PP retention ratings: 0.10, 0.20, 0.45, 1.00, 3.00, 5.00, and 10.0 µm
PES retention ratings: 0.10, 0.20, 0.45, and 0.65 µm
PTFE retention ratings: 0.10, 0.20, 0.45, and 1.00 µm
PVDF retention ratings: 0.20, 0.45, and 1.00 µm
Nylon retention ratings: 0.10, 0.20, 0.45, 0.65, and 1.00 µm
Effective filtration area: At least 0.12 m² for 2.5 in and at least 0.25 m² for 5 in
Compatible pH range: 1 to 13
Normal operating temperature: Up to 60°C
Maximum operating temperature: 85°C at differential pressure not exceeding 0.10 MPa
Maximum differential pressure at 25°C: 0.42 MPa forward and 0.21 MPa reverse
Endotoxin level: Less than 0.50 EU/mL
Extractables: Less than 0.03 g per 10 in cartridge
Connection options: NPT, hose barb, Swagelok, tapered hose connector, sanitary clamp, and Luer Lock

Multiple membrane-material options
Broad retention-rating selection
Low internal hold-up volume
Disposable one-piece construction
Multiple connection configurations
Integrity-tested cartridge assembly
Simple and rapid installation
Suitable for pretreatment and final filtration

STEM-BC-0068-ZJF
STEM-BC-0069-ZJF
STEM-BC-0172-ZJF
STEM-BC-0173-ZJF
STEM-BC-0174-ZJF