0

Inquiry Basket

There is no product in the shopping cart.

Mill and Grinder

Samples must be homogenized to an adequate degree of analytical fineness and uniformity for chemical and physical analytical methods. Proper sample preparation impacts throughput, data quality, and analytical cost. Mills and grinders are used for to break dry or wet samples into smaller particles by grinding, crushing, or cutting. Blades are used in mills to cut up samples into finer particles. The grinding of solid matter occurs under the action of mechanical forces that trench the structure by overcoming of the interior bonding forces. Changes in solid state after grinding: the grain size, the grain size disposition and the grain shape.

Home /

General Laboratory Equipment

Mill and Grinder

CAT#: STEM-BC-3899-ZJF

Product Name: LC-FG-48 Cryogenic Grinder, 48-Sample Capacity and -50-37°C

CAT#: STEM-BC-3900-ZJF

Product Name: LC-FG-96 Cryogenic Grinder, 96-Sample Capacity and Approximately 5 µm Output

CAT#: STEM-BC-4087-ZJF

Product Name: LC-CP-200×150 Hammer Crusher, <50 mm Feed and ≤6 mm Output

CAT#: STEM-BC-4088-ZJF

Product Name: LC-CP-350×200 Hammer Crusher, <70 mm Feed and 3 kW Motor

CAT#: STEM-BC-4129-ZJF

Product Name: φ200×75 Smooth Double-Roll Crusher, 300 kg/h

CAT#: STEM-BC-4130-ZJF

Product Name: φ200×125 Smooth Double-Roll Crusher, 450 kg/h

CAT#: STEM-BC-4131-ZJF

Product Name: φ200×150 Smooth Double-Roll Crusher, 600 kg/h

CAT#: STEM-BC-4135-ZJF

Product Name: Negative-Suspension 100×60 Jaw Crusher, ≤50 mm Feed and 0.1-15 mm Output

CAT#: STEM-BC-4136-ZJF

Product Name: Negative-Suspension 100×100 Jaw Crusher, ≤80 mm Feed and 1-25 mm Output

CAT#: STEM-BC-4137-ZJF

Product Name: Negative-Suspension 100×125 Jaw Crusher, ≤85 mm Feed and 300-2000 kg/h

CAT#: STEM-BC-4138-ZJF

Product Name: Negative-Suspension 150×125 Jaw Crusher, ≤90 mm Feed and 500-3000 kg/h

CAT#: STEM-AL-0783-ZJF

Product Name: BMH024 Bead Mill Homogenizer, 24x2.0 ml

CAT#: STEM-AL-3575-ZJF

Product Name: ST-Q200 Four-Station Planetary Ball Mill, ≤0.1 µm

CAT#: STEM-AL-3578-ZJF

Product Name: ST-PM200 Disc Mill, <100 µm

CAT#: STEM-AL-3579-ZJF

Product Name: ST-Q400 Liquid Nitrogen Planetary Ball Mill, ≤0.1 µm

CAT#: STEM-AL-3580-ZJF

Product Name: ST-Q500 High-Speed Planetary Ball Mill, 800 rpm

CAT#: STEM-AL-3584-ZJF

Product Name: ST-D300 10 L Knife Mill, <300 µm

CAT#: STEM-AL-3585-ZJF

Product Name: ST-P200 2 L Vibratory Cup Mill, <75 µm

CAT#: STEM-AL-3586-ZJF

Product Name: ST-Q300 Single-Jar Planetary Ball Mill, 650 rpm

CAT#: STEM-AL-3590-ZJF

Product Name: ST-P100 Disc Vibratory Mill, <75 µm

CAT#: STEM-AL-3593-ZJF

Product Name: ST-R200 Cutting Mill, 120 kg/h