Electronic-Grade High-Purity Water PP Cartridge, 0.10-50 µm (CAT#: STEM-BC-2991-ZJF)

This pleated cartridge is designed for high-purity water and electronic-process filtration. It uses polypropylene microfiber membrane with polypropylene nonwoven flow-distribution layers. The cartridge is produced through pleating, edge sealing, structural assembly, and welded end-cap joining. No adhesive is used, and the flow path is designed to prevent media shedding. The electronic-grade version is manufactured in a controlled cleanroom and rinsed with high-purity water. Imported and domestic polypropylene membrane options support different retention requirements. The broad pore-size range allows use for pretreatment, polishing, and terminal particle removal. Each cartridge undergoes integrity testing before release.

Membrane material: Polypropylene
Membrane options: Imported hydrophilic PP, imported PP, high-performance PP, and standard PP
Flow-distribution material: Polypropylene nonwoven fabric
Outer housing: Polypropylene
Inner support: Polypropylene or stainless-steel-lined polypropylene
Outside diameter: 68 or 69 mm
Inside diameter: 32 mm
Available lengths: 2.5 to 40 in
Filtration ratings: 0.10, 0.20, 0.45, 1.00, 3.00, 5.00, 10.0, 20.0, 40.0, and 50.0 µm
Effective filtration area: ≥0.55 m²
pH range: 1 to 14
Normal operating temperature: ≤55°C
Maximum operating temperature: 80°C at differential pressure ≤0.10 MPa
Maximum differential pressure at 25°C: 0.42 MPa forward and 0.21 MPa reverse
Endotoxin: <0.25 EU/mL
Extractables: <0.03 g per 10 in cartridge
Electronic-grade process: Controlled cleanroom production and 4 h high-purity-water rinsing

Electronic-grade clean production
Low extractables
Broad pore-size selection
High-purity-water rinsed
Low pressure drop
Adhesive-free welded assembly
Non-shedding polypropylene flow path
Complete integrity testing

STEM-BC-1003-ZJF
STEM-BC-1010-ZJF
STEM-BC-1023-ZJF
STEM-BC-1026-ZJF
STEM-BC-1076-ZJF