Tubing for Pressure Use, 1/2 in. ID, Merck KGaA (CAT#: STEM-L-0472-LKN)

Cat Number: STEM-L-0472-LKN

Application: Accessories for filter holders for sample preparation.

Model: XX6700035

Description Specification Features Related Products

Description

Tubing for Pressure Use, 1/2 in. ID, model XX6700035 is manufactured by Merck KGaA. This product is PVC tubing for holding liquid for filtration through Millipore pressure-operated filter holders.

Specification

Parameter: 9 bar max. inlet pressure (125 psi).
I.D.: 1.27 cm (0.5 in.).
L: 3 m (10 ft), 305 cm.

Other recommended products

Rinsed and Cleaned 304 Stainless Steel Tubing, ID 0.04", OD 1/16", Restek (CAT#: STEM-LT-0039-LC)
I-Flex Thermoplastic Tubes, SUS-TPE-0250-0500, STEMart (CAT#: STEM-GC-5196-Y)
Julabo^™ Bath Tubing, Viton^®, I.D. × L 8 mm × 1 m, Julabo (CAT#: STEM-L-7371-LC)
PTFE Tubing, O.D.×I.D. 23×20mm, 5m, STE-Mart (CAT#: STEM-LT-0069-LC)
Tubing Coupler, Union 1/4-28 Female Omnifit for Male Nut 1/4-28, E. I. du Pont de Nemours and Company (CAT#: STEM-L-0475-LKN)
Silicone Rubber Laboratory Tubing, 1/2 in. × 5/8 in., Merck KGaA (CAT#: STEM-L-4356-LC)
Norprene^® A-60-G Laboratory Tubing, I.D. × O.D. 3/16 in. × 5/16 in., Tygon (CAT#: STEM-L-7347-LC)
WHEATON® Peroxide Cured Silicone Tubing, Silicone Tubing Assembly, 6mm I.D., DWK Life Science (CAT#: STEM-LT-0211-LC)