HM9L Fish-Back Load Cell, 10-60 t Capacity (CAT#: STEM-BC-3368-ZJF)

The HM9L is a fish-back load cell designed for installation beneath fixed pulley shafts. It can also be mounted below balancing pulley shafts or similar axle structures. The sensor functions as a pulley support while measuring the applied load. It is intended for large bridge cranes, gantry cranes, and other engineering lifting equipment. Fully welded sealing and internal potting provide IP68 environmental protection. Electroless nickel plating improves corrosion and rust resistance. Available rated capacities range from 10 t to 60 t. High lateral-force resistance, impact resistance, and 300% ultimate overload support demanding crane applications.

Rated capacities: 10, 15, 20, 30, 40, 50, and 60 t
Accuracy class: G5
Combined error: ≤±0.5% F.S.
Creep: ≤±0.1% F.S./30 min
Sensitivity temperature effect: ≤±0.05% F.S./10°C
Zero temperature effect: ≤±0.05% F.S./10°C
Output sensitivity: 1.5 ±0.02 mV/V
Input resistance: 750 ±10 Ω
Output resistance: 700 ±7 Ω
Insulation resistance: ≥5000 MΩ at 50 VDC
Zero output: 1.0% F.S.
Compensated temperature: -10°C to 40°C
Operating temperature: -30°C to 70°C
Recommended excitation: 5-12 VDC
Maximum excitation: 18 VDC
Safe overload: 150% F.S.
Ultimate overload: 300% F.S.
Protection rating: IP68
Material: Alloy steel

10-60 t capacity range
Fixed-pulley installation
IP68 fully sealed design
Nickel-plated alloy steel
Strong lateral-force resistance
High impact resistance
300% ultimate overload
Crane weighing application

STEM-BC-0250-ZJF
STEM-BC-0380-ZJF
STEM-BC-1644-ZJF
STEM-BC-1645-ZJF
STEM-BC-1646-ZJF