MBCY Melt-Blown Filter Cartridge, PP, 0.1 μm (CAT#: STEM-BC-0165-ZJF)

The MBCY series is an absolute-rated PP melt-blown filter cartridge with gradient pore design. It forms a depth dirt-holding structure that provides good flow rate and service life. The highest filtration precision reaches 0.1 μm. It is suitable for hard coating liquid, spray coating liquid, and other low-viscosity materials. The cartridge provides good removal of gels and particles. It is recommended for materials with viscosity below 1000 cps. It tolerates ethyl acetate, ketones, and low-content aromatic solvents. Multiple interfaces, lengths, and seal materials are available.

Model: MBCY, 68MBCY
Filter media: PP
Support/flow layer: PP
Housing / center rod / end caps: PP
Maximum operating temperature: 80°C
Maximum differential pressure: 3 bar at 21°C and 1.2 bar at 80°C
Viscosity range: <1000 cps
Compatible adhesive types: Silicone, hard coating materials
Solvent tolerance: Ethyl acetate, ketones, low-content aromatics
Filtration precision: 0.1 to 90 μm
Center rod material: PP
Interface options: No gasket, PE gasket, 222 flat, 222 fin, 226 fin, 226 flat, DOE flat with gasket
Seal options: Silicone, EPDM, FKM, FEP, PTFE

Absolute-rated PP melt-blown filter
Gradient pore structure
High gel and particle removal
Suitable for low-viscosity coating liquids
Highest precision to 0.1 μm
Good flow rate
Long service life
Multiple interface and seal options

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF