YG Sanitary Inline Filter Housing, 0.6-1.0 MPa (CAT#: STEM-BC-2872-ZJF)

This sanitary inline filter housing is designed for direct installation in liquid or gas pipelines. It uses a straight-through top-inlet and bottom-outlet flow path with minimal internal dead space. The housing is manufactured from 304 or 316L stainless steel. Its hygienic internal geometry supports cleaning and use in quality manufacturing standard-oriented processes. Standard cartridge interfaces allow the housing to perform precision, prefiltration, or sterilizing-grade duties. The compact structure is suitable for direct vessel connection and small-batch process testing. Gas-service applications include compressed-air terminal filtration and vessel vent filtration. Each housing is hydrostatically tested at 1.25 times its design pressure before release.

Series: YG
Housing material: 304 or 316L stainless steel
Standard housing diameters: 63, 89, and 102 mm
Cartridge interfaces: 226 and 126
Maximum operating pressure: 0.6 to 1.0 MPa
Maximum operating temperature: 140°C
Internal surface treatment: Mirror polishing or electropolishing
External surface treatment: Matte, mirror polishing, or electropolishing
Available polishing grades: 200#, 300#, 400#, or electropolished
Seal material: Food-grade silicone rubber
Closure options: Clamp, reinforced three-section clamp, sanitary sleeve, or quick-release bolt
Flow direction: Top inlet and bottom outlet
Pressure test: 1.25 times design pressure

Straight-through pipeline configuration
Hygienic dead-space-reduced flow path
Liquid and gas filtration capability
Multiple stainless steel material options
Several polishing-grade selections
Standard cartridge-interface compatibility
Convenient installation and cleaning
Verified hydrostatic pressure resistance

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF