HF150 High-Flow Filter Cartridge, PP/GF, 150 mm (CAT#: STEM-BC-0159-ZJF)

The HF150 high-flow filter cartridge has a 6 inch / 150 mm diameter and is designed for large-flow water treatment applications. A single cartridge can provide more than 8 m² of filtration area and a maximum flow rate up to 60 m³/h for 40 inch configurations. The cartridge combines high-density pleating, large filtration area, high dirt-holding capacity, and long service life. PP and GF media options are available to match temperature and performance requirements. The internal PP skeleton resists deformation and supports higher reverse differential pressure. A dense double-layer polyester outer net improves mechanical strength and pressure resistance. The V-shaped sealing design provides reliable sealing performance. The end-handle design supports convenient replacement and reduces service time.

Model: HF150
Filter media: Deep pleated PP or resin-bonded glass fiber/polyester
Support layer: PP or polyester
End cap: Glass-fiber-reinforced PP
Outer net: Polyester
Center rod: PP
Maximum operating temperature: PP 80°C, GF 130°C
Maximum differential pressure: 0.38 MPa at 21°C and 0.15 MPa at 21°C depending on configuration
Lengths: 20, 40, 60 inch
Design flow: 15, 30, 45 m³/h
Maximum flow: 30, 60, 90 m³/h
Filtration area: 2.8, 5.6, 8.4 m²
Filtration precision: 0.5 to 90 μm
Seal options: Silicone, EPDM, FKM, PTFE

Large 150 mm diameter design
High-density pleated structure
Filtration area up to 8.4 m²
High dirt-holding capacity
PP skeleton resists deformation
Double-layer polyester outer net
V-shaped seal improves sealing
End-handle design enables fast replacement

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF