Tissue Grinding Homogenizing Centrifuge H24C/Wonbio-H24-C, 6000 rpm (CAT#: STEM-AL-4845-ZJF)

The tissue grinding homogenizing centrifuge is a laboratory sample-preparation instrument designed for combined sample disruption, homogenization, and subsequent centrifugal processing. It processes samples through three-dimensional bead motion followed by high-speed centrifugation. The system supports tube adapters from 2 mL to 50 mL. Operators manage the run through a 10-inch touch-screen interface. The adapter-based configuration allows the sample format to be matched to the intended workflow. Its closed operating arrangement helps contain grinding tubes during processing. The instrument is suitable for preparing material before nucleic acid, protein, or compositional analysis. The integrated workflow reduces transfers between grinding and centrifugation steps.

Models: H24C and Wonbio-H24-C
Sample Capacity: 24 × 2 mL, 12 × 5 mL, 8 × 15 mL, 6 × 30 mL, or 4 × 50 mL
Display: 10-inch LCD touch screen
Centrifuge Speed: Up to 6000 rpm
Maximum RCF: 3000 × g
Vibration Damping: Three-stage
Program Storage: 10-200
Cycle Setting: 1-99
Interface: USB
Homogenization Speed: 0-5300 rpm or 1.5-7.95 m/s
Run Time: 0-9999 min as provided
Final Particle Size: Approximately 5 µm
Grinding Ball Diameter: 0.1-30 mm
Acceleration/Deceleration Time: 1-10 s
Noise: <55 dB
Dimensions: 380 × 520 × 400 mm
Weight: 38 kg
Voltage: 220 V
Motor Power: 340 W
Compressor Power: 1 HP, 734 W
Cooling Capacity: 280 W

Integrated grinding and centrifugation
Automatic lid lift
Three-stage vibration damping
Touch-screen control
Preset and custom programs
USB software interface
Automatic center positioning
Wet and dry grinding