Purcise SLE Low Protein Adsorption Hydrophilic PES Sterilizing Filter (CAT#: STEM-BC-0053-ZJF)

Purcise SLE is a hydrophilic PES sterilizing filter designed for low adsorption and low extractables. It is suitable for final product sterile filtration, biological product sterile filtration, blood and serum product filtration, vaccine filtration, pre-column protection, ultrafiltration protection, intermediate product filtration, and bulk solution filtration. The filter can be directly steam sterilized when dry, according to the stated product feature. The construction includes hydrophilic Polyethersulfone Filter Membrane, polypropylene support layers, polypropylene structural components, and PBT interface liners for cartridge formats. Capsule and SP3 capsule formats provide additional configuration options. Standard and large-area filtration formats are available for different throughput requirements. The filter supports integrity testing and serial number traceability. Sterilization compatibility varies by format and configuration.

Membrane: Hydrophilic PES
Support layer: Polypropylene
Center core/Housing/End cap: Polypropylene
Cartridge interface liner: PBT
Cartridge seal materials: Silicone, Fluororubber, EPDM, Encapsulated fluoropolymer
Capsule housing: Polypropylene
SP3 capsule interface liner: 316L stainless steel
SP3 capsule housing: PEI
Standard filtration area: 0.55 m² per 10 inch
Large-area filtration options: 0.8 m² and 1.04 m² per 10 inch
Membrane configurations: 0.2 μm, 0.45/0.2 μm, 0.65/0.2 μm, 0.8/0.2 μm, 1.2/0.2 μm
Maximum forward differential pressure: 0.69 MPa at 25°C, 0.40 MPa at 60°C, 0.24 MPa at 80°C

Low adsorption
Low extractables
Dry steam sterilization capability
Hydrophilic Polyethersulfone Filter Membrane
Suitable for biological products
Cartridge and capsule formats
Multiple membrane configurations
100% integrity tested

STEM-BC-0020-ZJF
STEM-BC-0021-ZJF
STEM-BC-0022-ZJF
STEM-BC-0023-ZJF
STEM-BC-0024-ZJF