Purcise SLT Low Adsorption Hydrophilic PES Sterilizing Filter (CAT#: STEM-BC-0055-ZJF)

Purcise SLT is a low-adsorption hydrophilic PES sterilizing filter designed for culture media filtration. It provides low cytotoxicity and low adsorption for biological liquid processing. The construction includes hydrophilic Polyethersulfone Filter Membrane, polypropylene support layers, polypropylene structural components, and PBT interface liners for cartridge formats. Capsule formats use polypropylene housings and silicone vent O-rings. The filter is available in multiple membrane configurations for different sterile filtration requirements. It supports online steam sterilization and autoclave sterilization for cartridge formats, with capsule sterilization according to configuration. Each unit is 100% integrity tested and traceable by unique serial number. The product is suitable for culture media filtration where low adsorption and reliable sterile processing are required.

Membrane: Hydrophilic PES
Support layer: Polypropylene
Center core/Housing/End cap: Polypropylene
Cartridge interface liner: PBT
Cartridge seal materials: Silicone, Fluororubber, EPDM, Encapsulated fluoropolymer
Capsule housing: Polypropylene
Capsule vent O-ring: Silicone
Standard filtration area: 0.55 m² per 10 inch
Membrane configurations: 0.45/0.2 μm, 0.65/0.2 μm, 0.8/0.2 μm
Maximum forward differential pressure for standard cartridge: 0.69 MPa at 25°C, 0.40 MPa at 60°C, 0.24 MPa at 80°C
Maximum reverse differential pressure for standard cartridge: 0.30 MPa at 25°C, 0.10 MPa at 80°C

Low cytotoxicity
Low adsorption
Hydrophilic Polyethersulfone Filter Membrane
Suitable for culture media
Multiple membrane configurations
Cartridge and capsule formats
100% integrity tested
Traceable serial number

STEM-BC-0020-ZJF
STEM-BC-0021-ZJF
STEM-BC-0022-ZJF
STEM-BC-0023-ZJF
STEM-BC-0024-ZJF