PSSC Stainless Steel Mesh Filter Cartridge, 10 μm (CAT#: STEM-BC-0187-ZJF)

The PSSC stainless steel mesh filter cartridge is made from 316 stainless steel mesh. Its pleated structure provides a larger filtration area, higher dirt-holding capacity, and higher flow rate than flat mesh structures. It is suitable for steam filtration, strong polar solution filtration, decarbonization filtration, viscous liquid filtration, oxidizing liquid filtration, and corrosive liquid filtration. The cartridge can also be used for liquid and gas filtration under high-temperature and high-pressure conditions. It supports multiple cleaning methods for reuse. Ultrasonic cleaning, high-pressure water backflushing, high-temperature baking, and solvent soaking can be selected according to the contaminant type. The stainless steel construction supports stable operation at temperatures up to 480°C. Multiple precision, length, diameter, interface, and seal options are available.

Nominal filtration rating: 1.0, 2.0, 5.0, 10, 15, 20, 30, 60, 100 μm
Material: 316 stainless steel
Operating temperature: ≤480°C
Maximum differential pressure: 0.3 MPa
Diameter: Ø65 mm, Ø170 mm
Length: 5, 10, 20, 30, 40 inch
Cleaning methods: Ultrasonic cleaning, high-pressure water backflushing, high-temperature baking, solvent soaking
Mesh cover: With or without mesh cover
Interface options: DOE flat, 222 flat, 226 flat, 222 fin, 226 fin, threaded, custom
Diameter options: 25, 30, 50, 65, 70 mm and custom
Seal options: Silicone, EPDM, Viton, FEP, PTFE

316 stainless steel mesh construction
Pleated high-area design
High dirt-holding capacity
High flow rate
Reusable after cleaning
Suitable for high-temperature operation
Suitable for corrosive fluids
Multiple cleaning methods available

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF