The WGH6450 is a five-element flame photometer for potassium, sodium, lithium, calcium, and barium. It uses characteristic emission produced by flame-excited atoms to determine concentration. The instrument supports quantitative analysis over the individual ranges listed for each element. Up to three elements in any selected combination can be displayed simultaneously. A menu-driven keyboard and LCD simplify method configuration and result viewing. Automatic correlation calculation assists with calibration evaluation. Standard curves can be saved, and single-point correction is available for routine adjustments. Preset flame control, flame-out protection, and a moisture separator support reliable combustion conditions. The RS232 interface allows connection to PC software and compatible printers for result management.
Specification
Power supply: 220 V, 50 Hz Rated power: 250 W Display: LCD Measured elements: K, Na, Li, Ca, and Ba K range: 0-100 µg/mL Na range: 0-100 µg/mL Li range: 0-100 µg/mL Ca range: 0-1000 µg/mL Ba range: 0-3000 µg/mL K detection limit: ≤0.004 mmol/L Na detection limit: ≤0.008 mmol/L Li detection limit: ≤0.015 mmol/L Ca detection limit: ≤0.050 mmol/L Ba detection limit: ≤0.058 mmol/L K linearity error: ≤0.005 mmol/L Na linearity error: ≤0.03 mmol/L Li linearity error: ≤0.02 mmol/L Ca linearity error: ≤0.07 mmol/L Ba linearity error: ≤0.07 mmol/L Short-term stability: Relative maximum indication change ≤3% within 15 s Long-term stability: Relative maximum indication change ≤15% over six measurements at 1 min intervals Repeatability: ≤3% Calibration methods: Piecewise-linear, linear, and curve methods as listed Sample uptake rate: <6 mL/min Communication: RS232 Net weight: 10 kg Product dimensions: 400 × 275 × 460 mm
Features
Five-element measurement capability Flexible three-element display Wide calcium and barium ranges Automatic correlation calculation Stored calibration curves Single-point correction Flame and moisture protection RS232 PC and printer output