WGH6430 Flame Photometer, K/Na/Li Measurement (CAT#: STEM-BC-4147-ZJF)

The WGH6430 is a multi-element flame photometer for potassium, sodium, and lithium measurement. It uses flame heat to excite sample atoms and detects the resulting element-specific emission. Concentration values are calculated from the measured spectral intensity. The instrument can display up to three selected elements simultaneously. An LCD and menu-style keyboard provide straightforward operation. Automatic correlation calculation assists with standard-curve evaluation. Flame intensity can be preset, and standard curves can be saved for future measurements. Single-point correction supports routine analytical adjustment. Flame-out protection, moisture separation, and RS232 communication improve safety, stability, and data handling.

Power supply: 220 V, 50 Hz
Rated power: 250 W
Display: LCD
Measured elements: K, Na, and Li
K range: 0-100 µg/mL
Na range: 0-100 µg/mL
Li range: 0-100 µg/mL
K detection limit: ≤0.004 mmol/L
Na detection limit: ≤0.008 mmol/L
Li detection limit: ≤0.015 mmol/L
K linearity error: ≤0.005 mmol/L
Na linearity error: ≤0.03 mmol/L
Li linearity error: ≤0.02 mmol/L
Short-term stability: Relative maximum indication change ≤3% within 15 s
Long-term stability: Relative maximum indication change ≤15% over six measurements at 1 min intervals
Repeatability: ≤3%
Calibration methods: Piecewise-linear, linear, and curve methods as listed
Sample uptake rate: <6 mL/min
Communication: RS232
Net weight: 10 kg
Product dimensions: 400 × 275 × 460 mm

Three-element simultaneous display
Potassium, sodium, and lithium analysis
Direct concentration readout
Automatic calibration correlation
Flame preset control
Saved standard curves
Integrated flame-out protection
PC and printer connection

STEM-BC-4145-ZJF
STEM-BC-4146-ZJF
STEM-BC-4148-ZJF
STEM-BC-4149-ZJF
STEM-BC-4150-ZJF