Tunable PowerArc Illuminator, Optical Building Blocks, a Division of HORIBA Scientific (CAT#: STEM-LE-0806-LC)

The choice of adjustable PowerArc™ illuminator lamps and light grids primarily determines the performance of the illuminator. However, for any given lamp and grating, the selected slit adjustment (or bandwidth) will also affect the intensity output of the device. The Tunable PowerArc™ illuminator equipped with a xenon lamp and a 2,400 g/mm grating that emits light at 300 nm will provide you with optical power of up to 80 mW in a 20 nm bandpass.

Type:Tunable Illuminator
Wavelength Range:180 to 24000 nm
Lamp Type:Arc lamps (Xenon lamp, Mercury lamp and Tungsten-halogen filament lamp)
Resolution:0.25 to 30 nm
Dimensions:(WxDxH) 100 x 210 x 100 mm (Lamp Housing)
Power Consumption:50 to 100 W
Output Range:180 to 2200 nm
Lamp Lifetime:800 to 1000 hours
Wavelength Accuracy:+/- 1 nm
Light Source:Arc lamps (Xenon lamp, Mercury lamp and Tungsten-halogen filament lamp)
Scanning Speed:500 nm/sec
Optical System:Tunable illuminator
Connections:USB
Slit Width:0 to 30 nm or 0 to 7.5 mm
Repetition Rate:0 to 500 Hz (with optical optical chopper)
Beam Divergence:f/4
Beam Diameter:3 to 5 mm (lamp dependent)
Wavelength(s):180 to 24000 nm
Bandwidth:0.25 to 30 nm

Continuously tunable from 180 nm to 24 microns
Continuously adjustable bandpass from 0 to 200 nm
Milliwatts of energy
Push button start and simple dial the wavelength tunability
No ozone venting required
Easy to use
Compact and portable

Tunable KiloArc Illuminator, Tunable PowerArc Micro-Illuminator