RMF High-Precision Depth Filter Cartridge, PP, 0.1 μm (CAT#: STEM-BC-0166-ZJF)

The RMF high-precision depth filter cartridge is made from continuously wound PP filter media. It can be produced with different PP gradient structures to achieve higher efficiency than ordinary melt-blown cartridges. The multi-layer wound structure provides a much larger filtration area than standard melt-blown filters. This results in higher dirt-holding capacity and longer service life. The all-PP construction contains no adhesive, reducing extractables. Raw materials meet NSF requirements. The cartridge is suitable for security filtration, process water filtration, and tea beverage clarification. Multiple precision grades, interfaces, and lengths are available.

Model: RMF-CRN, RMF-GUF, RMF-CMPN
Filter media: PP
Support/flow layer: PP
Housing / center rod / end caps: PP
Maximum operating temperature: 80°C
Maximum differential pressure: 3 bar at 21°C and 1.2 bar at 90°C
Filtration precision: 0.1 to 5.0 μm and other grades by selection
Interface options: No gasket, PE gasket, 222 flat, 222 fin, 226 fin, DOE flat with gasket, FD222 flat
Length options: 5, 10, 20, 30, 40 inch
Seal options: Silicone, EPDM, FKM, FEP, PTFE, none

All-PP adhesive-free construction
Low extractables
High dirt-holding capacity
Multi-layer gradient structure
Longer service life than melt-blown filters
Large filtration area
Suitable for security and process water filtration
Multiple interface options

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF