RK12-130-P Integrated High-Flow Filter Cartridge, 30 μm (CAT#: STEM-BC-0177-ZJF)

The RK12-130-P integrated filter cartridge is designed with an enlarged internal membrane area for high-flow filtration. Compared with standard RK12 cartridges, the increased filtration area supports longer effective filtration time. It is suitable for long-duration continuous coating filtration in high-flow processes. The design helps reduce cartridge replacement frequency and slurry waste. A bottom drainable structure allows process fluid recovery and reuse. The PRF-HC membrane design combines winding and pleating technology. This structure increases flow capacity while maintaining filtration efficiency. The integrated PP construction supports stable operation in slurry filtration applications.

Filter media: PP
Flow layer: PP
Center rod/housing/end caps: PP
Maximum operating temperature: 80°C
Design pressure: 0.6 MPa (6.0 bar)
Maximum differential pressure: 0.4 MPa (4.0 bar)
Membrane series: PRF-HC, HC
Filtration precision: 30, 50, 75, 100, 125, 150 μm and custom
Seal: EPDM
Example model: RK12-130-P-PRF-HC3000E

Enlarged membrane area
Integrated cartridge structure
Suitable for long continuous filtration
Reduces cartridge replacement frequency
Reduces slurry waste
Bottom drain design
PRF-HC winding and pleating structure
Supports high-flow coating processes

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF