Oral-Liquid Clarification PP Pleated Filter Cartridge, Multi-Interface (CAT#: STEM-BC-3006-ZJF)

This polypropylene pleated cartridge is designed for clarification and security filtration of oral-liquid pharmaceutical products. It uses a polypropylene microfiber membrane supported by nonwoven fabric or mesh layers. The pleated depth-filtration structure provides a large membrane area and high contaminant capacity. Suspended particles can be removed before downstream filling or finer filtration steps. The cartridge housing, center core, and end caps are joined through thermal welding. No adhesive is used, reducing the risk of extractables or secondary contamination from bonding agents. Standard 222, 226, flat-end, and fin-end configurations support installation in different sanitary housings. Cartridge length and layer configuration can be customized for specific process requirements. Each finished cartridge undergoes integrity testing before use.

Model: Oral-Liquid Clarification PP Pleated Filter Cartridge
Membrane material: Polypropylene microfiber
Support layers: Polypropylene nonwoven fabric or mesh
Standard lengths: 10, 20, and 30 in
Other available lengths: 5 and 40 in
Interface options: 222, 226, flat end, and fin end
Filtration ratings: 0.1, 0.2, 0.45, 1, 3, 5, 10, 20, 30, and 50 µm
Construction method: Thermal or ultrasonic welding
Adhesive: None
Application grade: Pharmaceutical
Customization: Cartridge layers and lengths available

Designed for oral-liquid clarification
Multiple standard interfaces
Large pleated membrane area
High contaminant-holding capacity
Low operating pressure drop
Adhesive-free construction
Custom lengths and layers
Integrity-tested cartridge

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF