Minipore WF Series Whole Forming Pleated Cartridge Filters, Max. Operating Temperature 80°C, Minipore (CAT#: STEM-GMAE-3449-LGZ)

Material of Construction
Filter media: PP-Polypropylene, GF-Glass fiber
Support layer: PP
Core / Cage / End adaptor: PP
Seal Material : Silicone, EPDM, Buna, Viton, Teflon

Recommended Operating Conditions
Max. Differential Pressure:
Forward- 75psi (5.1bar) at 25°C
Forward- 25psi (1.7bar) at 80°C
Reverse- 30psi (2.0bar) at 25°C
Filters change recommended at 1.5-2.0bar
Max. Operating Temperature: 80°C
Sterilization: 5times, 20 Minutes cycles at 121°C

Cartridge Dimensions
Filtration Area: 0.5m2 each 10" length
Outer Diameter: 69mm
Nominal Length: 5", 10", 20", 30", 40"
Micron rating: PP - nominal 0.1, 0.2, 0.45, 0.65, 1, 3, 5....μm
GF - absolute 0.45, 0.65, 1, 3, 5....μm ß5000(99.98% efficiency)

Single whole piece cage and core construction.
Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases.
Pleated design increased the filtration area.
low pressure drop, long service life.
Full range of removal ratings.
Graded pore density for high dirt holding capacity.

Minipore SSP Stainless Steel Pleated Cartridge Filters, Support Layer SS, Minipore (CAT#-STEM-GMAE-3455-LGZ)
Minipore UHFP-D Ultra Highflow Bag Filter Cartridge, Pleated PP, Minipore (CAT#-STEM-GMAE-3450-LGZ)
Minipore UHFP-C Ultra Highflow Filter Cartridge, Length 40"/1005mm, Minipore (CAT#-STEM-GMAE-3451-LGZ)
Minipore UHFP-B Ultra Highflow Filter Cartridge, Length 40"/1051mm, Minipore (CAT#-STEM-GMAE-3452-LGZ)
Minipore UHFP-A Ultra Highflow Filter Cartridge, Outside Diameter 6"/152mm, Minipore (CAT#-STEM-GMAE-3453-LGZ)
Minipore SW String Wound Cartridge Filters, Maximum Differential Pressure 4.5bar at 25℃, Minipore (CAT#-STEM-GMAE-3454-LGZ)