Microwave Digestion System ATPIO-6T, 6-Vessel Capacity (CAT#: STEM-AL2-4520-ZJF)

The instrument is a microwave digestion system for controlled preparation of analytical samples. It uses microwave energy to heat sealed digestion vessels containing samples and reagents. Temperature and pressure monitoring are integrated into the reaction-control architecture. PID-based heating control regulates the programmed digestion process. The vessel construction is selected for resistance to elevated temperature, pressure, and corrosive digestion media. A self-locking door and pressure-related protective measures support controlled operation of the microwave cavity. The system is configured for multi-vessel sample preparation before elemental or spectrometric analysis. It is suitable for laboratories that require repeatable microwave-assisted digestion of trace-analysis samples.

Microwave Output Power: 1000 W
Microwave Frequency: 2450 MHz
Microwave Cavity Volume: 45 L
Vessel Capacity: 6 vessels
Power Input: AC 220 V, 50 Hz, 10 A
Heating Control: PID
Heating Ramp Rate: 1-50°C/min
Cooling Time: <=25 min
Microwave Leakage: <=0.3 mW/cm²
Temperature Control Range: 0-300°C
Temperature Control Accuracy: 0.1°C
Pressure Control Range: 0-6 MPa
Pressure Control Accuracy: 0.01 MPa
Outer Vessel Material: PEEK
Inner Vessel Material: TFM1700
Maximum Vessel Temperature: 300°C
Working Temperature: 250°C

Continuous microwave output
PID heating control
Temperature and pressure monitoring
Self-locking sliding safety door
PEEK outer vessel construction
TFM1700 inner vessel construction
Microwave leakage protection
Forced-air cavity ventilation