High-Flow Gradient-Pore Filter Cartridge, 110 m³/h (CAT#: STEM-BC-2935-ZJF)

This high-flow cartridge is designed for large-volume water and process-liquid filtration. It uses a gradient pore structure to capture contaminants progressively within the filtration media. The inside-to-outside flow direction retains collected impurities inside the cartridge. Its 152 mm outside diameter provides substantially more filtration area than conventional narrow cartridges. A single element can process up to 110 m³/h under the stated conditions. The high single-cartridge flow reduces the number of elements required in a filter housing. Fewer cartridges allow the associated housing diameter and overall system footprint to be reduced. Glass-fiber and polypropylene pleated-media configurations are available for different temperature requirements. Multiple cartridge lengths and retention ratings support a range of clarification and water-treatment duties.

Outside diameter: 152 mm
Inside diameter: 89 mm
Available lengths: 20, 40, and 60 in
Filtration ratings: 1, 5, 10, 15, 20, 40, 70, and 100 µm
Maximum temperature for pleated glass fiber: 121°C
Maximum temperature for pleated polypropylene: 82°C
Maximum differential pressure for glass fiber: 0.34 MPa at 121°C
Maximum differential pressure for polypropylene: 0.34 MPa at 82°C
Recommended replacement differential pressure: 0.12 MPa at 20°C
Recommended maximum flow for 20 in cartridge: 40 m³/h
Recommended maximum flow for 40 in cartridge: 70 m³/h
Recommended maximum flow for 60 in cartridge: 110 m³/h

Gradient pore structure
Inside-to-outside flow path
High single-element throughput
Reduced cartridge quantity
Smaller housing footprint
Multiple precision selections
Glass-fiber and polypropylene options
Stable contaminant retention

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF