Flame Photometer F-300, Source Block Lists F-100/K/Na (CAT#: STEM-AL2-0240-ZJF)

The top-level product row identifies this instrument as the F-300 flame photometer. The internal parameter block in the same source row identifies the model as F-100 rather than F-300. That parameter block lists potassium and sodium as measurable elements. The listed potassium and sodium detection limits are ≤0.004 mmol/L and ≤0.008 mmol/L respectively. Repeatability for repeated measurement of the same standard solution is listed at ≤3%. Sample aspiration is listed at ≤6 mL/min with a response time below 8 seconds. Automatic ignition, flame-out detection, gas shutoff, moisture separation, and RS-232 communication are also listed. The normalized row preserves this internal source mismatch without assigning unsupported F-300-specific numerical performance.

Product Type: Flame Photometer
Model: F-300
Internal Source Parameter-Block Model: F-100
Listed Elements In Parameter Block: K, Na
K Detection Limit: ≤0.004 mmol/L
Na Detection Limit: ≤0.008 mmol/L
Repeatability: ≤3%
Sample Aspiration: ≤6 mL/min
Response Time: <8 s
Communication: RS-232

Flame Emission Measurement
Multiple Calibration Fits
Automatic Ignition
Flame-Out Protection
Moisture Separation
RS-232 Communication