130 High-Flow Filter Cartridge, PES, 2.0 m² (CAT#: STEM-BC-0158-ZJF)

The 130 high-flow filter cartridge is designed for large-volume liquid filtration where high flow rate and simplified installation are required. Its large-diameter structure and high pleat density provide more than 2.0 m² of filtration area for PES configurations. The PES asymmetric membrane provides more than three times the service life of ordinary cartridges under similar process conditions. The cartridge supports flow rates above 200 L/min, reducing cartridge quantity and system footprint. Available membrane options include PP, PES, and PTFE for different clarification or sterile filtration needs. It is suitable for LVP filtration, buffer filtration, disinfectant filtration, cleaning solution filtration, and water for injection filtration. The cartridge uses PP structural components and selectable sealing materials. Matching housings are available in stainless steel or PP.

Model: 130
Membrane options: PP, PES, PTFE
Housing and end caps: PP
Flow layer: PP
Filtration area: PP 0.76 m², PES 2.0 m², PTFE 2.5 m²
Maximum operating temperature: 80°C
Maximum operating pressure: 0.69 MPa at 25°C and 0.24 MPa at 80°C
PP pore sizes: 0.2, 0.6, 1.0, 2.0, 5.0, 10, 20, 40 μm
PES pore sizes: 0.1, 0.22, 0.45, 0.65, 1.2 μm
PTFE pore sizes: 0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10 μm
Housing material options: 316L, 304 stainless steel, PP
Housing operating pressure: 0.6 MPa or 1.0 MPa

Large-diameter high-flow design
Filtration area above 2.0 m² for PES
Flow rate above 200 L/min
Long service life from PES asymmetric membrane
Simplified installation
Multiple membrane materials available
Suitable for clarification and sterile filtration
Compatible with dedicated high-flow housings

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF