ZBLY-300 260 rpm Automatic Feeding Shaking Incubator (CAT#: STEM-AL-3280-ZJF)

ZBLY-300 is an automatic Feeding Shaking Incubator designed for fed-batch microbial culture. It combines controlled incubation with programmable shaking in an enclosed chamber. The feeding configuration supports controlled addition of culture medium during operation. The chamber configuration supports routine loading, observation, and cleaning. The control interface presents operating setpoints and measured conditions in one location. Temperature and motion are regulated by an electronic control system. Safety functions address abnormal conditions and interruptions in electrical power. Compatible clamps or platforms hold the stated flasks, bottles, or plates. The system supports repeatable culture workflows within the specified operating ranges.

No-Load Shaking Speed: 10-260 rpm
Shaking Speed Accuracy: ±1 rpm
Orbit Diameter: Ø26 mm
Temperature Range: 4 °C-60 °C(at ambient temperature 23-25 °C)
Temperature Setting Accuracy: ±0.1 °C
Temperature Uniformity: ±0.6 °C(at37 °C)
pH Control Range: 2-12
Feeding Control Range: 2 mL/h-1000 mL/h
Chamber Interior: Rounded-corner chamber
Display: LCD touchscreen
Convection: Forced convection
Control Method: PID microcomputer control
Platform Dimensions: 870 mm × 560 mm
Capacity: Custom Erlenmeyer flask500 mL × 10 or 1000 mL × 10 or 2000 mL × 6
Power Supply: AC220±10%, 50-60Hz
Overall Dimensions: 1175 mm × 880 mm × 1445 mm
Approximate No-Load Weight: 265 kg
Noise Level: <65 dB
Lower Platform-To-Top Clearance: 650 mm

Controlled feeding supports nutrient addition during culture
Stainless steel interior supports cleaning and corrosion control
Seamless chamber construction supports thorough cleaning
Door-opening stop function improves handling safety
Power-loss recovery restores operating settings
Overtemperature protection supports safe operation
Ultraviolet sterilization supports chamber hygiene