Vacuum Centrifugal Concentrator VAC-P, 3 L Cold Trap (CAT#: STEM-AL2-1052-ZJF)

The VAC-P is a vacuum centrifugal concentrator for evaporating water and organic solvents from laboratory samples. It combines centrifugal motion, reduced pressure, and temperature control to support controlled sample concentration. Lowering the system pressure reduces solvent boiling temperature and enables evaporation under comparatively mild thermal conditions. Centrifugal rotation keeps samples within their vessels and helps limit foaming, splashing, and cross-contamination. The instrument is intended for biological, analytical, chemical, pharmaceutical, and general laboratory concentration workflows. It can be configured for common sample vessels including microcentrifuge tubes, glass tubes, centrifuge tubes, chromatography vials, centrifuge bottles, and multiwell plates. Programmable control supports repeatable concentration cycles while the chamber design simplifies routine handling and cleaning. Depending on the configuration, the system integrates or connects to a vacuum pump and cold trap for solvent-vapor management.

System configuration: Concentrator main unit + vacuum pump + 3 L low-temperature cold trap
Supported vessel volume range: 1.5-250 mL
Speed range: 0-2000 rpm
Temperature control accuracy: ±1°C
Maximum centrifugal force: 590 × g
Vacuum gauge display: <0.1 MPa
Timer range: 0-99 h 59 min
Noise: ≤50 dB(A)
Cold trap temperature: -65°C/-80°C/-110°C
Total power: 1300 W
Sample chamber pre-cooling: Available
Power supply: AC 220 V, 50/60 Hz, 10 A
Centrifugal imaging: Optional
Dimensions (L × D × H): 520 × 350 × 240
Temperature control range: Room temperature to 100°C
Weight: 30 kg
Temperature increment: 0.1°C

Chemical-resistant centrifugal chamber
Modular system architecture
Built-in vacuum-delay function
Maintenance-free induction motor drive
Five-stage chamber temperature control
Stored program operation
Touch-screen operating display
Automatic vacuum-release control