Tube Incubator DB-115, RT+5-100°C (CAT#: STEM-AL2-4211-ZJF)

The Tube Incubator DB-115 is a compact temperature-control instrument for temperature-controlled tube incubation. Samples are held in a solid heating block or dedicated sample positions rather than an open liquid bath. The heating system transfers thermal energy directly to the inserted vessels or reaction positions. The controller regulates the operating temperature for repeatable incubation or digestion steps. The block format reduces liquid handling around the samples during heating. The instrument supports timed or continuous temperature-controlled preparation according to its control configuration. The bench-top design is intended for routine loading and removal of tubes or compatible vessels. It is suitable for laboratory workflows requiring localized dry heating with controlled temperature.

Table Columns: Model /DB-115 /Model /Technical Parameter /Capacity
Power: 500W /DB-115-A /MD-01 /24x2.0ml tubes
Temperature Range: RT+5--100°C /DB-115-B /MD-02 /48x1.5ml tubes
Temperature Fluctuation: ±0.5°C /DB-115-C /MD-03 /54x0.5ml tubes
Temperature Accuracy: 0.1°C /DB-115-D /MD-04 /96x0.2ml tubes
Capacity: 24x1.5ml (standard) /DB-115-E /MD-05 /35x2.0ml tubes
Timer: 0-999min /DB-115-F /MD-06 /15x0.5ml+20x1.5ml
Heating Time: <=30min /DB-115-G /MD-07 /20x5ml tubes
Power Supply: 110V60Hz/220V 50Hz /DB-115-H /MD-08 /12x15ml tubes
Overall Dimensions: 240x240x140mm /DB-115-I /MD-09 /16x10ml tubes
Weight: 7kg /DB-115-J /MD-10 /6x50ml tubes
DB-115-K: MD-11 /15x5ml Eppendorf tube

PID temperature regulation
Automatic fault diagnostics
Automatic alarm function
Timed operation
Dry-block sample heating
Direct vessel-to-block thermal transfer
Compact bench-top design
Temperature-controlled incubation