Thermo Scientific™ Single-Use 3D BioProcess Container (CAT#: AM-BP-0054-LC)

The Thermo Scientific™ Single-Use 3D BioProcess Container (BPC) is used in the Thermo Scientific™ Accent™ Plastic Outer Container. It is composed of Thermo Scientific™ ASI™ 26/77 Polyethylene Film, and contains interconnecting C-Flex tubing and three ports (3 MPX insert with cap, 1 Kleenpak body connector). The bioprocess container supported by the plastic outer container eliminate complex on-site sterilization and cleaning procedures. Large volumes of cell culture media, buffers, or other liquids from the outer container remain clean and can be directly used. The system consisting of Accent™ Plastic Outer Container and Thermo Scientific™ Single-Use 3D BioProcess Container is applied in fluid collection, storage and distribution.

Dimensions: 76.2 x 54.1 x 27.8 cm (30 x 21.3 x 11.3 in.)
Film: ASI™ 26/77 Polyethylene
Outer Packaging: One 4-mil. poly bag
Port Detail: MPX inserts with caps, Kleenpak body connector
Protective Inner Packaging: Poly bags on tubing ends, protective material around rough areas
Quantity: 3 per case
Recommended Storage: Room temperature
Sterilization: gamma-irradiated
Tubing: Silicone, ID x OD: 12.7 x 19.1 mm (0.5 x 0.75 in.)
Volume: 100 L