SW-TFG-12 Fume Hood, 1030 × 700 × 600 mm Work Area (CAT#: STEM-BC-3918-ZJF)

The SW-TFG-12 is a laboratory fume hood designed to remove hazardous gases generated during experiments. A fan creates negative pressure that draws room air through the front opening and into the cabinet. Contaminated air is discharged through the upper exhaust outlet to help protect laboratory personnel. The circular exhaust connection reduces airflow disturbance and supports convenient duct installation. A 4 mm glass sash can stop at any selected height for flexible access. Spring-assisted vertical doors at the front and rear of the work area simplify positioning. The stainless-steel work surface resists corrosion and does not readily generate particles. Four swivel casters allow the cabinet to be moved and positioned as required. The unit is suitable for laboratory procedures involving gas exhaust, equipment washing, and liquid drainage.

Power supply: AC 220 V, 50 Hz
Rated power: 500 W
Illumination intensity: ≥300 lx
Average inner-side airflow velocity: 0.38 ± 0.025 m/s
Average middle-side airflow velocity: 0.26 ± 0.025 m/s
Average rear-side airflow velocity: 0.27 ± 0.025 m/s
Inflow velocity: 0.35 ± 0.025 m/s
Airtightness value: ≤106 m/s as listed
Exhaust velocity: 0.3-0.6 m/s
Vibration half-peak value: ≤0.5 µm
Exhaust direction: Upward
Drainage velocity: 0.25-0.45 m/s
Worktop height: 760 mm
Work-area dimensions: 1030 × 700 × 600 mm
Operating noise: 65 dB
Net weight: 200 kg
Product dimensions: 1200 × 750 × 1950 mm

High-volume negative-pressure exhaust
Adjustable 4 mm glass sash
Circular upper exhaust outlet
Corrosion-resistant stainless-steel worktop
Front and rear spring-assisted doors
Four swivel casters
Low-vibration operation
Integrated drainage capability

STEM-BC-0982-ZJF
STEM-BC-0983-ZJF
STEM-BC-3919-ZJF
STEM-BC-3920-ZJF