Shinetek Celltron Shaker, Maximum Load 3.5Kg, Shinetek Instruments Research Institute (CAT#: STEM-CC-3264-LGZ)

Dynamic and gentle shaking culture can obtain higher cell density than culture in static incubator.

Model: Celltron
Oscillation speed: 20~200rpm, control accuracy 1%Max
Amplitude: 25mm
Maximum load: 3.5Kg
Operating temperature range: 4°C ~60°C (controller tolerance temperature ≤45°C)
Humidity range: ≤98%rH (non-condensing) (controller can withstand humidity <60%rH)
Size: 380x450x90mm
Power supply: External power supply 110/230V±10%, 50~60 Hz, 14W
Carrying capacity:
50ml x 35
100ml x 23
250ml x 12
500ml x 5
1000ml x 5
2800ml x 1

Magnetic drive
With magnetic drive, no drive belt is required. Smooth starting and braking technology, specially designed for cell culture, will not generate high liquid shear force to damage cells.

Antibacterial surface
The surface has a coating containing pure metallic silver, which kills microbes on the surface and can reduce bacteria and fungi by 105 times (Celltron only has this feature).

Low calorific value
The DC brushless motor is adopted, the power is very small, and almost no heat enters the incubator, which ensures the temperature stability in the incubator and provides ideal culture conditions for cell culture.

Water vapor, CO2 solution proof design
Electronic components such as electrical coils and vibration motors are protected with epoxy coatings for high humidity environments. The rest of the circuit components such as the control panel and LED display are placed outside the box.

Intuitive controls
Touch keys (Celltron only) with separate display area. Simple control menu, users do not need special training to operate. The controller can be installed outside the CO2 incubator, and the customer will not change the parameters of other incubators when changing the shaker parameters.

Remote control unit
The remote controller is placed outside the box. The value of each parameter is clearly displayed, and the setting parameters can be viewed without opening the incubator. Saves operating time and reduces heat loss and CO2 consumption due to door opening.

The remote controller is connected to the shaker through a cable
The remote control is connected to the shaker with a thin cable that passes through the airtight glass door, allowing it to be used even if your incubator does not have a power outlet.
The remote controller can be fixed on the outer wall of the cabinet by magnets or hooks, or placed directly on the top of the cabinet.

Anti-corrosion material
The box structure is made of ABC plastic and stainless steel, which can avoid the corrosion effect of long-term use in high humidity + CO2 environment

Audible alarm
The sound and light alarm device integrated on the controller can monitor the cultivation situation in real time.

Shinetek Multifunctional Cell Shaking Incubator, Multitron Monolayer Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3308-LGZ)
Shinetek Ecotron Benchtop Shaking Incubator, 30-550 RPM, Shinetek Instruments Research Institute (CAT#-STEM-CC-3291-LGZ)
Shinetek Microtron High Speed Shaking Incubator, Microtron 3mm Single Layer Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3299-LGZ)
Shinetek Microtron High Speed Shaking Incubator, Microtron 3mm Three-Layer Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3300-LGZ)
Shinetek Minitron Cell Shaking CO2 Incubator, Pallet Size 480×420 mm, Shinetek Instruments Research Institute (CAT#-STEM-CC-3303-LGZ)
Shinetek Minitron-Bacteria Shaking Incubator, Pallet Size 480×420 mm, Shinetek Instruments Research Institute (CAT#-STEM-CC-3304-LGZ)