Sanyo MCO-19AICUV-PA CO2 Incubator, Sanyo (CAT#: STEM-CC-2041-LGZ)

The manufacturer of Sanyo MCO-19AICUV-PA CO2 Incubator is Sanyo. Model is MCO-19AICUV-PA. The SANYO MCO-19AIC CO2 incubator is designed for demanding and regulated applications in biomedical, pharmaceutical, medical research and clinical laboratories. This incubator can provide superior performance, and with advanced, multi-layered contamination control, provides an ideal solution for cell culture protocols.

Condition: used
Interior dimensions (W x D x H): 19.3" x 20.6" x 26.2" (490 x 523 x 665 mm)
Exterior dimensions (W x D x H): 24.4" x 27.9" x 35.4" (620 x 710 x 900 mm)
Volume: 6.0 cu.ft. (170 L)
Shelves: 15/chamber, 4 supplied standard; 17" x 17" (450 x 450 mm), 15.4 lbs (7 kg) capacity
New weight: 205 lbs (93 kg)
Temperature control range: +5C above ambient to 50C
Temperature control uniformity and deviation: +/-0.25C in 25C ambient, setting 37C
Airflow: vertical airflow, contrinuous with inner door closed
Interior humidity: 95% RH at 37C through evaporation via DHA heating system
Temperature and CO2 control: P.I.D. setpoint resolution 0.1 degree, 0.1%
Display: LED digital
Data acquisition: Automatic log function of termperature and CO2
Communications: Remote alarm contacts standard, optimal 4-20 mA connection, optional PC interface
Exterior cabinet and door (material): Galvanized steel exterior, baked-on enamel finish
Interior and shelves: Copper-enriched stainless steel
Inner door: Tempered glass
Insulation: Rigid foam polyurethane
Outer door: Reversible, heated
Access port: Single opening with interior and exterior 30 mm non-VOC silicone stoppers
Energy, electrical, utilities: 310 W
Maximum power consumption: 1061 BTU
Electrical: 115 V, 60 Hz with NEMA 5-15 Plug provided, requires NEMA 5-15R ground receptacle
CO2 gas connection: 4 to 6 mm inner diameter tubing
CO2 gas pressure: nominal 4.3 PSI from two-stage CO2 regulator

1. Designed for a wide range of demanding and highly regulated applications in biomedical, pharmaceutical, medical research and clinical laboratories.
2. Use SafeCell UV system to achieve H2O2 decontamination treatment function.

BMT Friocell Evo 55 Mechanical Convection Incubator, MMM Group(CAT#-STEM-CC-2216-LGZ)
BMT Friocell Evo 707 Mechanical Convection Incubator, MMM Group(CAT#-STEM-CC-2217-LGZ)
Fisher Scientific FS Drybath 88860023 Dry Bath Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-2218-LGZ)
New Brunswick Scientific Galaxy 48R CO2 Incubator, Eppendorf (CAT#-STEM-CC-2219-LGZ)
Heraeus HERACell CO2 Incubator, Heraeus(CAT#-STEM-CC-2221-LGZ)
Thermo Heracell 150 CO2 Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-2222-LGZ)