Sakura Tissue-Tek VIP Series Tissue Processors, Retort Capacity 200 Specimens, Sakura (CAT#: STEM-HEPO-0058-LGZ)

The Sakura Tissue-tek® VIP® Series are reliable tissue processors with distillation capacities for 100-specimen tissue-tek® VIP® 1000, 200-specimen tissue-tek® VIP® 2000, and 300-specimen tissue-tek ® VIP® 3000. With a sophisticated microprocessor, the VIP® control panel allows the user to prepare and store up to 10 different treatment programs at the touch of a single key.

The user-friendly Sakura Tissue-tek® VIP® Tissue Processors are not only designed for maximum reliability, but they also ensure the ultimate safety of your specimens. A computer monitors the entire process to continuously maintain all parameters in almost any situation. Even in the event of a power outage, the system will protect the integrity of your specimens.

Benchtop and compact, the Tissue-tek® VIP® Processor combines four key elements to produce better blocks: alternating pressure, vacuum, heat, and agitation. These elements are programmable in 10 reagent and 4 paraffin stations. The Sakura Tissue-Tek® range offers 14 stages of pre-programming of process cycles, cleaning cycles, P/V cycles and diagnostic systems. Operators can create and store up to 10 treatment programs at each station, detailing time, heat and P/V cycles.

Condition: certified pre-owned
Retort Capacity: 200 specimens
Dimensions/Floor Model: 1.09m (43″) high, 0.61m (24″) deep, 0.51m (20″) wide
Dimensions/Bench Model: 0.58m (23″) high, 0.61m (24″) deep, 1.02m (40″) wide
Weight: 110 kg (242 lbs.)
Voltage: 100-115 VAC, 50-60 Hz or 220-240 VAC, 50Hz
Reagent Reservoirs: Ten 3-liter reagent reservoirs, 2 cleaning reagent reservoirs and 2 fume filters
Oven Capacity: Four 3-liter interchangeable paraffin reservoirs
Operator Programming: Ten retained processing programs and a self-calculating delay timer – up to 99 days, 11 hours, 59 minutes
P/V Cycle Time: 30 seconds ambient, 90 seconds pressure, 30 seconds ambient, 90 seconds vacuum
Outputs: External warning relay

Store up to 10 different handlers
Distillation capacity 100, 200, or 300 specimens (depending on model)
Available in benchtop or floor models
Pre-programmed cleaning cycles, P/V cycles and diagnostic system
Programmable 14-level processing cycle

Sakura Tissue-Tek TEC 5 Embedding System, Thermal Chambers 50°C to 75°C, Sakura (CAT#-STEM-HEPO-0020-LGZ)
Shandon HistoCentre 2 Embedding Center, Shandon (CAT#-STEM-HEPO-0021-LGZ)
Histocentre 3 Embedding System, Cold Plate -12°C, Shandon (CAT#-STEM-HEPO-0022-LGZ)
Tissue-Tek TEC III Embedding Center Model 4584, Sakura (CAT#-STEM-HEPO-0023-LGZ)
Leica ASP300 Tissue Processor, Weight 140 kg, Leica (CAT#-STEM-HEPO-0053-LGZ)
Sakura Tissue Tek VIP 3000 Tissue Processor, Weight 120 kg, Sakura (CAT#-STEM-HEPO-0054-LGZ)