Leica ASP300 Tissue Processor, 68 x 59 x 132 cm, Leica (CAT#: STEM-HEPO-0053-YJL)

Leica ASP300 Tissue Processor, 68 x 59 x 132 cm, model ASP300, is manufactured by Leica. The Leica ASP300 is an automated processor for the paraffin infiltration of tissue in routine clinical and research histopathology applications. Equipped with a smart user interface and operating software, the ASP 300 simplifies tissue processing and enhances workflow, sample quality and laboratory performance.
With the Leica ASP300 tissue processor, documentation and printing for evaluation at a later time is made possible. The system also gives the user freedom to set all critical program parameters. The system is so smart that it even applies the best alternative route to success should anything unexpected occur.
The ASP300 software is easy to learn with an intelligent but simple operator interface. The software can be set in many different languages with intuitive graphics, guiding the user safely and smoothly through the program. The enhanced Reagent Management System is also helpful in satisfying laboratory QC requirements. Finally, the Smart-start function automates the scheduling information such as end-time and program parameters, helping avoid user errors and improves the reliability of operation.
The Leica ASP300‘s software control, functional design and reduced operator intervention guarantees consistently high sample quality. Four types of gentle agitation, precise temperature control, optical and maintenance-free level sensors are just a few examples available to ensure optimal sample quality.

Condition: Certified Pre-Owned
Dimensions (DxWxH): 68 x 59 x 132 cm (27 x 24 x 52 inches)
Weight (instrument only): 140 kg (308,7 lbs)
Display: Color touch-screen, solvent resistant
Reagent Management System: 3
Remote drain and fill system: 3
Remote paraffin drain system: 3
Reagent drip tray: 3
3.5 inch disk drive: 3
2 External alarm connections: 3
Parallel printer port: 3
Serial port: 3
Approvals: manufactured according to CE; c-UL, UL, CSA standards
PROCESSING RETORT
Maximum capacity: 300 cassettes
Retort material: stainless steel
Level sensing: optical sensors
Processing retort volume: 4.3 liters
Paraffin temperature range: 40 – 65℃
Reagent temperature range: ambient, 30 – 55 ℃
Temperature accuracy: +/- 1 ℃
Retort draining: selectable (80, 120, 140 seconds), 3 steps
Vacuum & pressure function: 4 (P/V, P, V, ambient)
Vacuum: -70 kPa (g)
Pressure: +35 kPa (g)
Recirculation (pump in/out): Time before 1st cycle: 12 minutes
Time between cycles: 20 minutes
Incubation time: 0-99 hours, 59 minutes
Delayed ‘end-time’: programmable, up to one week
PARAFFIN BATHS
Number of paraffin baths: 3, connected directly to the retort
Paraffin bath volume: 4.3 liters each
Average paraffin melting time: approx. 10 hours
REAGENT BOTTLES
Number of reagent bottles: 10
Reagent bottle volume: 4.3 liters each
Clean cycle bottles: 3, plus 1 external

User-friendly UI with a solvent-resistant color touch-screen display
Graphical process representation on color touch-screen
Innovative reagent compatibility monitor
Instrument performance control (QC)
Remote fill and drain system
4 pressure vacuum options (P/V, P, V, ambient)
4 user-defined cleaning programs
Active paraffin cleaning program
2-level password security

Sakura Tissue-Tek VIP Series Tissue Processors, 100 specimens, Sakura (CAT#: STEM-HEPO-0057-YJL)
Sakura Tissue-Tek VIP Series Tissue Processors, 200 specimens, Sakura (CAT#: STEM-HEPO-0058-YJL)
Sakura Tissue-Tek VIP Series Tissue Processors, 300 specimens, Sakura (CAT#: STEM-HEPO-0059-YJL)
Shandon Hypercenter XP Enclosed Tissue Processor, 1200VA, Shandon (CAT#: STEM-HEPO-0060-YJL)
Thermo Scientific Excelsior ES Tissue Processor, 20.5×26.5×63”, Thermo Scientific (CAT#: STEM-HEPO-0061-YJL)