Purcise SEA High Loading Hydrophilic PES Filter (CAT#: STEM-BC-0057-ZJF)

Purcise SEA is a hydrophilic PES filter designed for high-loading filtration of complex process fluids. It is intended for intermediate product filtration where reliable particle and microbial control is required. The filter uses a hydrophilic Polyethersulfone Filter Membrane with polypropylene support layers and polypropylene structural components. Cartridge versions include PBT interface liners and multiple sealing material options. Capsule and SP3 capsule formats provide additional connection and sterilization configurations. The standard cartridge provides a 0.65 m² filtration area per 10 inch. The membrane configuration is specified as 0.45/0.2 μm. Each unit is integrity tested and traceable by unique serial number for process control.

Membrane: Hydrophilic PES
Support layer: Polypropylene
Center core/Housing/End cap: Polypropylene
Cartridge interface liner: PBT
Cartridge seal materials: Silicone, Fluororubber, EPDM, Encapsulated fluoropolymer
Capsule housing: Polypropylene
Capsule vent O-ring: Silicone
SP3 capsule interface liner: 316L stainless steel
SP3 capsule housing: PEI
Standard filtration area: 0.65 m² per 10 inch
Membrane configuration: 0.45/0.2 μm
Maximum forward differential pressure for standard cartridge: 0.69 MPa at 25°C, 0.40 MPa at 60°C, 0.24 MPa at 80°C

High loading capacity
Hydrophilic Polyethersulfone Filter Membrane
Suitable for complex fluids
Suitable for intermediate product filtration
Cartridge and capsule formats
Multiple connection options
Sterilization-compatible configurations
Integrity-tested traceable construction

STEM-BC-0020-ZJF
STEM-BC-0021-ZJF
STEM-BC-0022-ZJF
STEM-BC-0023-ZJF
STEM-BC-0024-ZJF