PowderSafe™ Type C Enclosure, 36"×30"×54", AirClean Systems (CAT#: STEM-LE-1207-Y)

The PowderSafe™ Type C Enclosure is manufactured by AirClean Systems. This model is equipped with AirSafe™ automatic safety controller, which has a uniform laminar airflow and can achieve accurate weighing. Moreover, the entire rear wall of the housing is a filtering area; all particles and gases are cleaned away.

External (W × D × H): 36"×30"×54"

• Polypropylene structure, strong chemical resistance
• Horizontal laminar flow mode
• No piping system required
• The low air volume alarm alerts the user visually and audibly
• Deep base can effectively prevent accidental overflow
• Integrated moisture-proof fluorescent lamp
• Directly plug into a standard 110V or 220V power socket to use
• AirSafe™ automatic safety controller
• Continuously monitor the surface speed of the hood through variable airflow control to reach the user preset value
• Vapor bonded carbon filtration
• Laboratory event timer
• HEPASafe™ technology allows HEPA filters to be safely replaced while the enclosure is running
• Permanent backup HEPA filter
• Electronic gas detection for real-time monitoring of gas-phase filters
• Effectively weigh to 7 decimal places
• Exhaust gas is filtered by HEPA to prevent any potential particulate matter from returning to the room
• The filter and electronic components are located above the work area
• Tested to meet UL 61010-1 and CSA C222 No61010-1 standards

PowderSafe Bulk Handling Balance Enclosures from AirClean Systems
PowderSafe Type A Balance Enclosure from AirClean Systems
PowderSafe Type B Balance Enclosure from AirClean Systems