Polypropylene Ductless Fume Hood, 72"×36"×54", AirClean Systems (CAT#: STEM-LE-1249-Y)

The Polypropylene Ductless Fume Hood is manufactured by AirClean Systems. The device is equipped with AirSafe automatic safety controller, AirZone™ baffle system and hot melt structural polypropylene, with advanced flue gas sealing performance and excellent chemical resistance

External (W × D × H): 72"×36"×54"

• Brushless, non-sparking blower is the rear filter
• The AirZone™ baffle establishes an appropriate horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, eliminating "dead spots" in the hood
• Polypropylene structure, strong chemical resistance
• No piping system required
• Directly plug into a standard 110V or 220V power socket to use
• AirSafe™ automatic safety controller
• Integrated moisture-proof fluorescent lamp
• A wide variety of bonded activated carbon and HEPA filters can be used to contain almost all toxic vapors, fumes, gases or particulate matter
• Vapor bonded carbon filtration
• Integrated base with deep overflow lip
• Laboratory event timer
• AirZone™ baffle prevents the hood from rolling and provides excellent gas and vapor barrier properties
• Deep base can effectively prevent accidental overflow
• Electronic gas detection for real-time monitoring of gas-phase filters
• The low air volume alarm alerts the user visually and audibly
• Real-time monitoring of installed filter beds
• Tested to meet UL 61010-1 and CSA C222 No61010-1 standards