Microwave Digestion and Extraction System XH-800D, 6-Position Rotary Turntable (CAT#: STEM-AL2-1423-ZJF)

The XH-800D is a microwave digestion and extraction instrument configured for sealed high pressure vessel operation. It is applied in energy storage and conversion research as well as in general digestion and extraction tasks. Microwave power at 2450 MHz is produced by a professional source with 1500 W input and 1000 W output. The 30 litre multimode stainless steel cavity accommodates a six position rotary turntable holding 100 ml vessels. Temperature is measured by a PT1000 contact temperature sensor with a range up to 300 degrees Celsius. Pressure is measured by a piezoelectric ceramic sensor with a range up to 10 MPa and a maximum working pressure of 6 MPa. A single channel temperature and pressure control system designed for parallel operation regulates both parameters at the same time. The vessels use a PEEK outer shell and a PTFE inner liner and are designed for repeated use. Air cooling supports continuous operation of 48 hours or longer.

Microwave Frequency: 2450MHz
Microwave Input Power: 1500W
Microwave Output Power: 1000W
Microwave Power Control: Continuously Adjustable
Microwave Cavity Material: Austenitic Stainless Steel
Microwave Cavity Volume: 30L
Microwave Cavity Mode: Multimode
Continuous Operating Time: 48h or Longer
Power Supply: AC220V Plus or Minus 10 Percent, 50Hz, 10A or 16A
Working Mode: High-Pressure Sealed Vessel Reaction
Temperature Measurement: PT1000 Contact Temperature Sensor
Temperature Sensor Range: 0-300 Degrees Celsius
Maximum Working Temperature: 260 Degrees Celsius
Temperature Control Range: 0-300 Degrees Celsius
Temperature Control Accuracy: Plus or Minus 1 Degree Celsius
Temperature Response Speed: 7ms
Pressure Measurement: Piezoelectric Ceramic
Pressure Sensor Range: 0-10MPa
Maximum Working Pressure: 6MPa
Pressure Control Range: 0-6MPa
Pressure Measurement Accuracy: 0.01MPa
Pressure Response Speed: 7ms
High-Pressure Vessel Specification: 100ml
Vessel Material: Outer PEEK and Inner PTFE
Maximum Vessel Pressure Resistance: 6MPa
Vessel Service: Reusable and Non-Disposable
Rotary Turntable Positions: 6
Temperature and Pressure Control: Single Channel System Designed for Parallel Operation
Cooling Method: Air Cooling

Six position rotary turntable for parallel sample processing
Professional microwave source with continuously adjustable output
PT1000 contact temperature sensor for direct measurement
Piezoelectric ceramic pressure sensor with automatic control
Reusable PEEK and PTFE vessel construction
Single channel temperature and pressure control for parallel systems
Multimode cavity for uniform microwave distribution
Air cooled design supporting extended runs