Instek Meter PCS-1000I In Elgin, IL, USA, GW Instek electrical test instruments (CAT#: STEM-AIPO-0590-YJL)

Instek Meter PCS-1000I In Elgin, IL, USA, model PCS-1000I is manufactured by GW Instek electrical test instruments.
The PCS-1000I is a meter from Instek.
PCS-1000I provides a BNC output, which can connect with an oscilloscope to directly observe current waveform variation without using a current probe. General oscilloscopes do not have isolated channels and their input and output are structured at a common point, therefore, the output load will likely result in measurement errors. PCS-1000I's isolated current output design can prevent measurement errors from an oscilloscope with non-isolated outputs. PCS-1000I, a high precision AC/DC current shunt meter, not only provides USB and GPIB communications interfaces for users to remotely control the instrument but also conducts simultaneous voltage and current measurements. The SCPI communications commands of PCS-1000I allow users to remotely control PCS-1000I via a PC to operate measurement data readbacks.
PCS-1000I will replace non-isolated output PCS-1000 models, which will be discontinued.

Condition: New
Ac voltage measurement levels: 200mV/2V/20V/200V/600V
Dc voltage measurement levels: 200mV/2V/20V/200V/1000V
Standard: USB & GPIB

6 Digit Voltage and Current Measurement Resolution
Simultaneous Current and Voltage Measurement
CE Verification

Instek GOM-802GP In Lake Mary, FL, USA (CAT#: STEM-AIPO-0607-YJL)
Instek GUT-6000A In Lake Mary, FL, USA (CAT#: STEM-AIPO-0608-YJL)
Instek GPT-9602 Hipot Tester In Roseville, CA, USA (CAT#: STEM-AIPO-0609-YJL)
Instek GPT-9603 Hipot Tester In Roseville, CA, USA (CAT#: STEM-AIPO-0610-YJL)
Instek GPT-9802 Hipot Tester In Roseville, CA, USA (CAT#: STEM-AIPO-0611-YJL)
Instek GPT-9804 Hipot Tester In Roseville, CA, USA (CAT#: STEM-AIPO-0612-YJL)