Fluke 99B 100MHz 2CH 5GSa/s Scopemeter In Rocklin, CA, USA, Fluke oscilloscopes (CAT#: STEM-AIPO-0525-YJL)

Fluke 99B 100MHz 2CH 5GSa/s Scopemeter In Rocklin, CA, USA, model 99B is manufactured by Fluke oscilloscopes.
The ScopeMeter test tool uses a three-lead connection system for dual input, isolated (electrically floating) measurements. Use a test lead connected to the black 4-mm banana jack as common ground. There are only three wires to connect for dual input isolated
ground operation, useful for three-phase industrial voltage measurements. You can connect the three leads on the test tool (INPUT A, INPUT B, and common) to a threephase electrical power line in any order. Use the A-B mode (see Chapter 5) to display all three phases of electrical power at the same time.

Condition: Used
Frequency Range/ Bandwith: 100 MHz
Min. Vertical Sensitivity: 1 mV/div
Number of Channels: 2 CH
Record Length: 30000
Sample Rate: 5 GS/s
Type: (D/A) Digital

Rugged, dual-input oscilloscope and high bandwidth
true RMS Meter in one instrument.
Four hours of battery operation.
Allows you to measure floating from mains with the
600V insulated probes.
Optically isolated PC/Printer interface.

Fluke 97 50MHz 2CH 25MSa/s Scopemeter In Rocklin, CA, USA (CAT#: STEM-AIPO-0526-YJL)
Fluke 96B 60MHz 2CH 2.5GSa/s Scopemeter In Rocklin, CA, USA (CAT#: STEM-AIPO-0527-YJL)
GW Instek GOS-6112 In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0530-YJL)
GW Instek GOS-6103C In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0531-YJL)
GW Instek GOS-6103 In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0532-YJL)
GW Instek GOS-6100B In New Smyrna Beach, FL, USA (CAT#: STEM-AIPO-0533-YJL)