HF150-MBCY High-Flow Melt-Blown Cartridge, PP, 150 mm (CAT#: STEM-BC-0160-ZJF)

The HF150-MBCY high-flow cartridge is a one-piece molded PP depth filter for applications with high contaminant loading. Its special molding process creates coarse fibers on the outside and nano-scale fine fibers on the inside, forming a gradient filtration structure. This structure provides high retention efficiency while maintaining a large dirt-holding space. The depth filtration design improves removal of colloidal contaminants. It is suitable for wastewater polishing, seawater desalination, and reclaimed water applications. The cartridge can replace pleated high-flow cartridges without equipment modification. Its maximum length is 60 inch and the outside diameter is 150 mm. Flow ratings are available up to 90 m³/h depending on length.

Model: 150MBCY, P-150MBCY
Filter media: PP
End cap: PP
Maximum operating temperature: 80°C
Maximum differential pressure: 3.0 bar at 21°C and 1.5 bar at 80°C
Outer diameter: 150 mm
Maximum length: 60 inch
Lengths: 20, 40, 60 inch
Design flow: 15, 30, 45 m³/h
Maximum flow: 30, 60, 90 m³/h
Filtration precision: 0.5 to 90 μm
Interface options: P type, M type, H type, custom
Seal options: Silicone, EPDM, FKM

One-piece molded construction
High structural strength
Gradient depth filtration
Coarse outer layer and nano-fiber inner layer
High dirt-holding capacity
Effective colloid removal
Suitable for high-contaminant water
Interchangeable with pleated high-flow cartridges

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF