H-SCF Single-Cartridge Liquid Filter Housing, 10 Inch (CAT#: STEM-BC-0194-ZJF)

The H-SCF single-cartridge liquid filter housing is a sanitary stainless steel filter housing for liquid filtration. The housing has a dead-space-free structure and is easy to clean. The inner wall can reach 0.3 μm polishing precision, while the outer wall can reach 0.4 μm. A ball-valve drain structure supports complete discharge with minimal residual liquid. The housing is available in 304 or 316L stainless steel. It supports 5 inch, 10 inch, and 20 inch filter cartridges. Cylinder connection options include two-section clamp and heavy-duty clamp. The inlet and outlet use 1S sanitary clamp connections, and the pressure gauge uses a 1.5S clamp connection.

Polishing type: Mirror polishing, internal electropolishing
Polishing precision: Inner wall 0.3 μm, outer wall 0.4 μm
Design pressure: 0.6 MPa (6 bar)
Housing material: 304 or 316L
Vent/drain valve material: 304 or 316L
Lifting ring: 304
Support legs: 304
Seal/gasket: Silicone, PTFE, EPDM
Cylinder connection: Two-section clamp or heavy-duty clamp
Inlet/outlet: 1S clamp
Vent valve: 4 mm inner hole, connects to 8 mm tube
Drain valve: 4 mm inner hole, connects to 8 mm tube
Pressure gauge: 1.5S clamp
Cartridge quantity: 1
Cartridge length: 5, 10, 20 inch
Cartridge interface: 226, 222, knife-edge flat

Hygienic sanitary design
Dead-space-free structure
Easy to clean
Complete drainage with low residue
304 or 316L stainless steel
Electropolished inner surface
Supports multiple cartridge lengths
Clamp connection design

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF