Forma Steri-Cult CO2 Incubator, T8.2 or 11.4 cu.ft., hermo Fisher Scientific (CAT#: STEM-LE-1811-LC)

The stackable Thermo Scientific Forma Steri-Cult consists of CO2 sensor, precise microprocessor control, active humidity control, HEPA air filtration and high temperature decontamination.

Temperature Range:[RT + 5C] to 50C
Interior Dimensions:(WxDxH) 20.8 x 20.6 x 32.8 in
Volume:8.2 or 11.4 cu.ft.
CO2 Measurement:IR
CO2 Range:0 to 20%

Built-in 140°C high temperature sterilization function lasts 14 hours. duration
Optimized airflow system does not interfere with sample or incubator function
Optional built-in VOC filter system to remove alternative organic vapors
HEPA air filtration in the cabin can continuously remove particles under 100-quality conditions
On-demand 140°C sterilization cycle eliminates internal surface contamination
If the outer door is opened or the temperature reaches 60°C (140°F) or higher during the cycle, an audible alarm will sound
Access code prevents accidental start of cycle
Alphanumeric messaging center clearly displays temperature, CO2 and RH
Audible/visual alarm with mute button
Temperature, overheat, CO2 and RH settings
Configurable sound on/off, access code, HEPA filter replacement reminder, remote alarm reminder, tracking low temperature and high and low CO2 and RH alarms
Rounded polished stainless steel interior
Remove sturdy shelves and supports without tools
Microbiological filter on the gas inlet, sample port and water bottle cap
The inner door gasket can be removed for cleaning to ensure a tight seal

Forma 310 Direct Heat CO2 Incubators, Forma Steri-Cycle CO2 Incubator, Heracell CO2 Incubator with Pure Copper Chamber, Heracell VIOS 160i CO Incubators