Ducted Fume Hood FH1200C(X) (CAT#: STEM-OEM-0122-ZJF)

The Fume Hood is a negative pressure ventilation system designed to protect both the operator and the laboratory environment. Room air enters through the front opening and is continuously extracted by the blower system, preventing hazardous fumes, vapors, aerosols, and corrosive gases from escaping into the workspace. Optional activated carbon filters can be installed to purify the exhaust air before it is released, helping to safeguard the external environment as well.

External Dimensions (W×D×H): 1200 × 840 × 2150 mm
Internal Dimensions (W×D×H): 1080 × 730 × 745 mm
Maximum Opening Height: 520 mm
Work Surface Height: 750 mm
Blower: Built-in centrifugal blower, speed adjustable with 9 levels
Air Velocity: 0.3 - 0.8 m/s
System Exhaust Volume: 780 m³/h
Noise Level: ≤68 dB
LED Lamp: 12 W ×1
UV Lamp: 20 W (emission of 253.7 nm for efficient decontamination)
Front Window: Motorized, 5 mm toughened glass, anti-UV
Material:
Exterior Body: Cold-rolled steel with anti-bacterial powder coating
Work Table: Chemical resistant phenolic resin
Waterproof Sockets: 2 sockets
Power Supply: AC 220V ±10%, 50/60Hz; 110V ±10%, 60Hz
Power Consumption: 400 W
Standard Accessories: Water tap, gas tap, water sink, base stand, 2 × UV lamps, LED lamp, socket, 5-meter exhaust duct, active carbon filter, foot switch
Optional Accessories: HEPA filter
Gross Weight: 253 kg
Package Dimensions (W×D×H): 1350 × 1120 × 1680 mm

UV lamp for sterilization.
Motorized front glass window, height adjustable.
Resistant to weak acids and alkalis.
9-level adjustable air speed.
Filter life alarm at 3500 hours of operation.
Memory function for power failure recovery.
Rear air compensation reduces turbulence in work area.
Ergonomic 8° front slope for fatigue-free posture.
Microprocessor control with LED display showing filter runtime.
Transparent side glass windows enhance lighting and visibility in the workspace.

STEM-OEM-0120-ZJF
STEM-OEM-0121-ZJF
STEM-OEM-0123-ZJF
STEM-OEM-0124-ZJF