Dry Block Incubator DH2000 Series, Up to 160 C (CAT#: STEM-AL-6541-ZJF)

Dry Block Incubator DH2000 Series is a temperature-controlled laboratory incubator for dry heating of samples and compatible vessels. It is intended for biochemical incubation, sample preparation, preservation, and reaction workflows. Temperature regulation is managed electronically to maintain a defined thermal environment during operation. The design avoids the use of an open water bath and supports routine laboratory handling. Compatible blocks, modules, or sample positions are selected according to the vessel format specified for the model. Programmable timing and temperature functions support repeatable incubation procedures where provided. Integrated control and protection functions help maintain stable operation during extended workflows. The instrument is suited to laboratory processes that require controlled heating with a compact benchtop format.

Model: DH2000-1 | DH2000-2 | DH2000-4
Temperature Control Range: Ambient +5 C-160 C | Ambient +5 C-130 C
Temperature Accuracy: ≤ ± 0.1 C(@37 C) | ≤ ± 0.1 C(@37 C) | ≤ ± 0.2 C(@37 C)
Temperature Accuracy: ±1 C(@120 C)
Temperature Uniformity: ±0.1 C | ±0.1 C | ±0.2 C
Display Resolution: 0.1 C
Timer Range: 1-99h59min/∞
Heating Time: ≤25 min(25 C 160 C) | ≤20 min (25 C 130 C)
Heating Rate: (1 C/min, 3 C/min, 5 C/min, AUTO)
Number of Modules: 1 | 2 | 4
Module Capacity: accessories
Display: color display 320*480
segments: 99 segments
Multi-Point Program: Supported, max 5 )
Multi-Point Cycles: Supported, max 99 cycles)
Automatic Preheating: Supported
Auto-Run at Power-On: Supported
Power-Loss Recovery: Supported
Timer Trigger Modes: 3
External Temperature Sensor Port: 1
Maximum Power: 200W | 400W | 600W
Power Supply: 220V 50/60Hz
Dimensions: 205x320x110 mm | 205x385x110 mm
Weight: 4.8kg | 6.1kg | 8.8kg
Optional Module: diameter | wells | notes
MD01: 6mm | 48 | hole depth 47mm
MD02: 7mm | 48 | hole depth 47mm
MD03: 10mm | 24 | hole depth 47mm
MD04: 12mm | 24 | hole depth 47mm
MD05: 13mm | 24 | hole depth 47mm
MD06: 15mm | 16 | hole depth 47mm
MD07: 16mm | 16 | hole depth 47mm
MD08: 19mm | 12 | hole depth 47mm
MD09: 20mm | 12 | hole depth 47mm
MD10: 26mm | 8 | hole depth 47mm
MD11: 28mm | 4 | hole depth 47mm
MD12: 40mm | 3 | hole depth 47mm
MD13: 0.2ml( centrifuge tubes) | 48 | standard centrifuge tubes
MD14: 0.5ml( centrifuge tubes) | 48 | standard centrifuge tubes
MD15: 1.5ml( centrifuge tubes) | 24 | standard centrifuge tubes
MD16: 2.0ml( centrifuge tubes) | 24 | standard centrifuge tubes
MD17: 0.2ml( PCR tubes) | 96 | DH2000-1 compatible with
MD18: 0.2ml( microplate) | 96 | DH2000-1 compatible with
RC02100W01: 1 | optional
RC02100L01: 1 | optional(DH2000-4not applicable)

Electronic temperature control
Programmable incubation timing
Dry heating without an open water bath
Interchangeable or format-specific sample support
Temperature calibration support
Benchtop sample-incubation design
Integrated thermal protection