Dry Bath Incubator MK-100, 0-100 Degrees Celsius Temperature Setting Range (CAT#: STEM-AL2-3541-ZJF)

The MK-100 is a dry bath incubator used to hold sample tubes at a controlled temperature. The whole unit operates from a safety extra-low voltage DC24V supply, which protects the operator when touching the aluminium module. Temperature stability and uniformity are high, which supports accurate and repeatable incubation. PID digital temperature control makes calibration faster and more convenient. An OLED display presents the operating parameters clearly. If the temperature exceeds the limit, the power is cut off automatically and an alarm is given, followed by rapid forced cooling to protect valuable reagents. The precision machined module provides good thermal transfer to the tubes. The compact and lightweight housing takes up very little bench space.

Temperature Setting Range: 0 Degrees Celsius to 100 Degrees Celsius
Temperature Control Range: RT+5 Degrees Celsius to 100 Degrees Celsius
Temperature Stability: 37 Degrees Celsius Plus or Minus 0.3 Degrees Celsius
Temperature Uniformity: 37 Degrees Celsius Plus or Minus 0.3 Degrees Celsius
Setting Resolution: 0.1 Degree Celsius
Display Resolution: 0.1 Degree Celsius
Temperature Control Accuracy: Plus or Minus 0.3 Degree Celsius
Display: OLED
Heating Rate: 25 to 37 Degrees Celsius in 4min or Less, 25 to 100 Degrees Celsius in 15min or Less
Cooling Method: Fan Cooling
Setting Time: 99h 59m 59s and Hold, Two Modes Selectable
Dimensions: 114x140x107mm (LxWxH)
Net Weight: 0.8kg
Input Power: DC24V
Total Power: 56W
Safety: Automatic Power Cut-Off and Alarm on Over Temperature
Note: At 23 Degrees Celsius Ambient Temperature

Safety extra-low voltage DC24V supply
High temperature stability and uniformity
PID digital temperature control with convenient calibration
OLED display for clear parameter presentation
Automatic power cut-off and alarm on over temperature
Forced fan cooling to protect temperature sensitive reagents
Precision machined module for good thermal transfer
Compact and lightweight housing