Bio-Rad GS-670 Imaging Densitometer In Ramsey, MN, USA (CAT#: STEM-AIPO-0273-YJL)

Bio-Rad GS-670 Imaging Densitometer In Ramsey, MN, USA, model GS-670, is manufactured by Bio-Rad general laboratory equipment.
The Bio-Rad GS-670 is a reliable and cost-effective imaging densitometer, ideal for autoradiographs and western blots. Each unit boasts of high resolution and a bundled software. Scans can be conveniently previewed in a few seconds. Options for the actual area of detailed scans are shown afterwards. Transmittance and reflectance modes allow for the virtual scanning of electrophoretic samples, DNAs, RNAs and proteins with this instrument.
The Bio-Rad GS-670 imaging densitometer can scan and quantify different analyses, including:
The Bio-Rad GS-670 Imaging Densitometer Software is fitted with a brightness and contrast palette as well as a noise reduction capability. This software can also produce outputs in histograms. Automated features of this imaging software include Auto Spot for finding and calibration as well as Auto Peak for finding and integration.

Condition: Used
Drive Module
Dimensions (W x D x H): 43 x 26 x 14 cm
Construction: Aluminum chassis
Weight: 7.8 kg (17.2 lb)
Maximum voltage: 250 V DC
Maximum current: 500 mA
Electrode potentials: Dynamically regulated (feedback adjustment) +/- 0.5%
Input voltage range:
90–132 VAC/47–63 Hz/0.7 A (maximum)
198–264 VAC/47–63 Hz/0.35 A (maximum)
Fuses:
0.5 A Fast Blow for high voltage output (front panel)
1.0 A Slow-Blow (100/120 V) or
0.5 A Slow-Blow (220/240 V)
Environmental
Operating temperature: 50°F (10°C) to 90°F (32°C); 30–80% humidity
Storage temperature: 32°F (0°C) to 140°F (60°C); 10–90% humidity
Control Module
Dimensions (W x D x H): 31 x 13.5 x 17 cm
Maximum current: 500 mA
Allowable voltage gradients: 0.6–6 V/cm, in 0.1 V/cm increments
Data entry: Keyboard
Power supply: 250 V maximum, to allow maximum gradient of 6 V/cm, continuously adjustable
Functional
Switching range: 0.1–65,000 sec (all electronic switching)
Maximum program blocks: 2, with automatic execution
Maximum run time: 999 hr per block
Input voltage range:
90–132 VAC/47–63 Hz/1.7 A (maximum)
198–264 VAC/47–63 Hz/0.85 A (maximum)
Fuses:
2.0 A Slow-Blow (100/120 V) or
1.0 A Slow-Blow (220/240 V)
Operating: 50°F (10°C) to 90°F (32°C); 30–80% humidity
Storage: 32°F (0°C) to 140°F (60°C); 10–90% humidity
Electrophoresis Cell
Dimensions (W x D x H): 44 x 43 x 11 cm, horizontal format
Construction: Acrylic
Lid: Safety interlocked
Weight: 8.5 kg (18.7 lb)
Electrodes: 24, platinum (0.01" diameter)
Temperature monitoring: Via precision temperature probe mounted through lid (optional)

Fast image acquisition (in not more than 15 minutes)
Transmittance and Reflectance modes
Variable wavelength light source
Equipped with internal interference filters
General Purpose Interface Bus (GPIB) to either Mac or PC
Available software in 1D or 2D but no 3D

Bio-Rad GS-700 Imaging Densitometer, 25 to 1200 dpi In Ramsey, MN, USA (CAT#: STEM-AIPO-0274-YJL)
Bio-Rad PowerLook 2100XL-USB In Woonsocket, RI, USA (CAT#: STEM-AIPO-0275-YJL)
BioRad GS-800 Calibrated Densitometer In Ramsey, MN, USA (CAT#: STEM-AIPO-0277-YJL)