Bio-Rad CHEF-DR II Electrophoresis Cell In Elkin, NC, USA (CAT#: STEM-EPO-0051-YJL)

Bio-Rad CHEF-DR II Electrophoresis Cell In Elkin, NC, USA, model CHEF-DR II, is manufactured by Bio-Rad general medical equipment.
The CHEF-DR II Electrophoresis Cell system effectively resolves DNA fragments in the range of 5 kb to 6 Mb. This system lets the user enhance resolution by entering two blocks of running conditions to be executed successively. It exclusively employs the most common angle of electrophoresis for PFGE, 120°. This system is simple to program, and has proven to be a solid performer.

Condition: Used
Output Voltage: DC: 0.05 ~ 6kV, AC: 0.05 ~ 5kV
Load Regulation: ±(2% of setting +0.1% of full scale)
Voltage Regulation: 2V
Calibration: NIST Calibration
Voltage Accuracy: ±(2% of setting +0.1% of ull scale)
Cutoff Current: DC: 25mA, AC: 100mA
Current Resolution: 0.1 µA DC ; 1 µA AC
Current Accuracy: ±(2% of reading +0.5% of range)
Output Frequency: 50Hz / 60Hz
Test Time: 0.3 ~ 999 sec, continue
Ramp Time: 0.1 ~ 999 sec, Off
Fall Time: 0.1 ~ 999 sec, Off
Waveform: Sine wave

Simple to Program
Based on CHEF (Clamped Homogeneous Electric Fields)
Maintains Homogeneous Electric Fields With Patented Dynamic Regulation

Bio-Rad CHEF-DR II Electrophoresis Control Module In Elkin, NC, USA (CAT#: STEM-EPO-0023-YJL)
Bio-Rad Cooling Module In Woonsocket, RI, USA (CAT#: STEM-EPO-0025-YJL)
Bio-Rad Pulse Controller II In Twinsburg, OH, USA (CAT#: STEM-EPO-0026-YJL)
2020 Bio-Rad Sub-Cell GT In Woonsocket, RI, USA (CAT#: STEM-EPO-0038-YJL)
Bio-Rad Chef DR II Control Module In Woonsocket, RI, USA (CAT#: STEM-EPO-0040-YJL)
Bio-Rad Chef-DR II Electrophoresis Drive Module In White Marsh, MD, USA (CAT#: STEM-EPO-0043-YJL)