Automated Media Dispensing System Samplefill400, 800 Plates/h (CAT#: STEM-AL-6397-ZJF)

The Samplefill400 is an automated culture-media dispensing system for filling sterile microbiological media into culture plates. It uses controlled peristaltic pumping to meter liquid media during the dispensing process. The plate-handling arrangement organizes culture dishes for sequential filling in the dispensing area. Calibration functions support adjustment of the delivered volume during routine operation. The system can incorporate additional functions for plate handling, media distribution, cooling, or identification depending on configuration. A dedicated disinfection arrangement is provided for the dispensing zone. Removable plate-contact components support cleaning and routine maintenance of the system. The equipment is intended to reduce repetitive manual filling work and improve consistency in laboratory media preparation workflows.

Power Supply: 220 V, 50/60 Hz
Current: 4 A
Ambient Temperature: 25 °C
Ambient Humidity: <90%
Pumping System: Dual peristaltic pump
Standard Tubing: No. 25 or No. 17
Dispensing Accuracy: About 1% at 20 mL
Standard Throughput: About 800 plates/h at 20 mL using dual pump heads and 90 mm plates
Plate Rack: 40 plates per section, 9 sections
Plate Loading Capacity: 280 x 90 mm plates
Optional Plate Diameter: 60 mm
Dispensing Tray: 6 sections for 90 mm plates
UV Wavelength: 254 nm
UV Power: 11 W
UV Service Life: 13000 h
Dimensions: 720 x 640 x 1000 mm as provided

Dual-pump media dispensing
Built-in volume calibration
Plate-distribution vibration function
Optional semiconductor cooling module
Optional plate-printing module
Independent UV-disinfection area
Removable plate rack and turntable
Equipment fault alarm