316L Sanitary Liquid Filter Housing, 1.0 MPa (CAT#: STEM-BC-3013-ZJF)

This sanitary liquid filter housing is designed for clarification and sterilizing filtration of pharmaceutical and hygienic process fluids. The housing is manufactured from 316L stainless steel for corrosion resistance and sanitary operation. Its streamlined construction minimizes cracks and internal dead spaces. Internal surfaces can be mirror polished or electropolished to support cleaning and disinfection. The housing can be fully disassembled for inspection and maintenance. It accepts flat-end, threaded, 222 insertion, 226 bayonet, and customized cartridge configurations. PES, nylon, PP, PTFE, and PVDF pleated media can be selected for different liquid or gas duties. Threaded, clamp, and flange connections allow installation in a range of process pipelines. Each filter housing is hydrostatically tested at 1.25 times its design pressure.

Model: 316L Sanitary Liquid Filter Housing
Housing material: SUS316L
Optional material: SUS304
Design pressure: 0.8 MPa
Working pressure: 0.6 MPa
Maximum operating pressure: 1.0 MPa
Design temperature: 20 to 150°C
Maximum operating temperature: 140°C
Seal types: O-ring and flat gasket
Seal material: Food-grade silicone
Connection options: Thread, sanitary clamp, and flange
Cartridge interfaces: Flat end, threaded, 222, and 226
Surface finish: Mirror polishing or electropolishing
Media options: PES, N6, N66, PP, PTFE, and PVDF
Hydrostatic test pressure: 1.25 times design pressure

316L corrosion-resistant housing
Sanitary crevice-reduced construction
Fully disassemblable design
Multiple cartridge interfaces
Broad membrane compatibility
Mirror or electropolished surfaces
High-temperature liquid service
Pressure-tested construction

STEM-BC-0007-ZJF
STEM-BC-0008-ZJF
STEM-BC-0009-ZJF
STEM-BC-0010-ZJF
STEM-BC-0011-ZJF