Walk-in Fume Hood FH1200(W), Biobase (CAT#: STEM-C-0050-LKN)

Fume Hood is used to protect lab environment and operator during general chemical applications. It actively protects operator from inhaling toxic vapors and dramatically reduces the risk of fire and explosion. By installing proper filter, it can also protect environment.

External Size (W*D*H): 1200*800*2200mm
Internal Size (W*D*H): 980*600*1650mm
Max Opening: 1300mm
Exhaust Airflow Volume: 1150m³/h
Inflow Air Velocity: 0.3~0.8m/s
Noise: 62dB
Vibration: XYZ direct ≤4μm
Illumination: ≥800Lux
Fluorescent Lamp: 12W*2
Power Supply: AC220V±10%, 50/60Hz; 110 V±10%, 60Hz
Consumption: 400W
Front Window: Manual, Toughened glass
Exterior Material: 1.0mm cold-rolled steel with bacteria powder coating.
Standard Accessory: High grade melamine board with good acid and alkali resistance function
Interior Material: Blower(External), LED lamp, Water tap, Gas tap, PP cup sink, Remote control water valve, Remote control gas valve, Waterproof sockets * 4, 4 meters PVC exhaust duct
Sockets: Total load of 4 waterproof sockets: ≤500W
Main body Package Size(W*D*H)mm/Gross Weight: 1410*1050*2430/240kg
Exhaust Blower Package Size(W*D*H)mm/Gross Weight: 1040*890*710/60kg

Water sink.
Water & gas remote control valve.
Water & gas tap.

ADVANTAGE
1.Operators are available to walk into the fume hood to operate if need.
2.Large room exhaust system, suitable for large laboratory instruments and equipment.

Walk-in Fume Hood FH1500(W), Biobase (CAT#: STEM-C-0051-LKN)
Walk-in Fume Hood FH1800(W), Biobase (CAT#: STEM-C-0052-LKN)