Vortex Mixer M6, 3000 rpm (CAT#: STEM-AL-6733-ZJF)

The M6 is a laboratory mixing instrument designed for rapid homogenization of liquid or suspended samples. Orbital eccentric motion creates a vortex or shaking action suitable for compatible tubes, vessels, or plates. The speed-control system regulates mixing intensity across the stated operating range. Timed and touch-operated modes support short manual mixing as well as longer programmed runs where specified. Compatible fixtures or sample holders expand the range of vessels that can be processed. The drive system is designed for stable benchtop operation during repeated mixing cycles. Safety and status functions provide operating feedback and protection according to the configured model. The instrument is suitable for routine sample preparation, analytical testing, and laboratory mixing workflows.

Model: M6
Power Supply: DC24V
Input Power: 20W
Speed Range: 200-3,000r/min.±5%
Motor: DC24V permanent-magnet direct-drive motor
Control: PWM stepless speed control
Operation: touch/continuous modes
Fastest Acceleration: ≤3s
Fastest Deceleration: ≤3s
Dimensions: 127×147×128mm
Weight: 3.5kg
Noise: ≤48dB(A)
Protection Rating: IP20
Operating Environment: +5-40°C/80%
Standards: EN 61010-1,EN 61010-2-020,EN 61326-1,EN 61010-3-2/A2
Maximum Load: 1.0Kg
Shaking Mode: orbital
Orbit Diameter: 4.5 / | LCD full numeric display | digital timer 1S-999min
Fuse: PPTC resettable fuse

Continuous and touch-operation modes
Low-maintenance motor drive
Interchangeable sample fixtures
Orbital vortex mixing
Compact benchtop construction
Programmable operating time
Adjustable mixing speed